References

  1. M. Elimelech, W.A. Phillip, The future of seawater desalination: energy, technology, and the environment, Science, 333 (2011) 712–717.
  2. V.S. Frenkel, Seawater Desalination: Trends and Technologies, INTECH Open Access Publisher, 2011.
  3. L.F. Greenlee, D.F. Lawler, B.D. Freeman, B. Marrot, P. Moulin, Reverse osmosis desalination: water sources, technology, and today’s challenges, Water Res., 43 (2009) 2317–2348.
  4. J. Wu, Z. Wang, W. Yan, Y. Wang, J. Wang, S. Wang, Improving the hydrophilicity and fouling resistance of RO membranes by surface immobilization of PVP based on a metal-polyphenol precursor layer, J. Membr. Sci., 496 (2015) 58–69.
  5. D. Potts, R. Ahlert, S. Wang, A critical review of fouling of reverse osmosis membranes, Desalination, 36 (1981) 235–264.
  6. X. Zhu, M. Elimelech, Colloidal fouling of reverse osmosis membranes: measurements and fouling mechanisms, Environ. Sci. Technol., 31 (1997) 3654–3662.
  7. E.M. Hoek, M. Elimelech, Cake-enhanced concentration polarization: a new fouling mechanism for salt-rejecting membranes, Environ. Sci. Technol., 37 (2003) 5581–5588.
  8. G.D. Kang, Y.M. Cao, Development of antifouling reverse osmosis membranes for water treatment: a review, Water Res., 46 (2012) 584–600.
  9. D. Rana, T. Matsuura, Surface modifications for antifouling membranes, Chem. Rev., 110 (2010) 2448–2471.
  10. L. Zou, I. Vidalis, D. Steel, A. Michelmore, S.P. Low, J.Q.J.C. Verberk, Surface hydrophilic modification of RO membranes by plasma polymerization for low organic fouling, J. Membr. Sci., 369 (2011) 420–428.
  11. J. Gilron, S. Belfer, P. Väisänen, M. Nyström, Effects of surface modification on antifouling and performance properties of reverse osmosis membranes, Desalination, 140 (2001) 167–179.
  12. G. Kang, M. Liu, B. Lin, Y. Cao, Q. Yuan, A novel method of surface modification on thin-film composite reverse osmosis membrane by grafting poly(ethylene glycol), Polymer, 48 (2007) 1165–1170.
  13. A.C. Sagle, E.M. Van Wagner, H. Ju, B.D. McCloskey, B.D. Freeman, M.M. Sharma, PEG-coated reverse osmosis membranes: desalination properties and fouling resistance, J. Membr. Sci., 340 (2009) 92–108.
  14. R. Yang, J. Xu, G. Ozaydin-Ince, S.Y. Wong, K.K. Gleason, Surface-tethered zwitterionic ultrathin antifouling coatings on reverse osmosis membranes by initiated chemical vapor deposition, Chem. Mater., 23 (2011) 1263–1272.
  15. C. Kim, S. Kim, J. Lee, J. Kim, J. Yoon, Capacitive and oxidant generating properties of black-colored TiO2 nanotube array fabricated by electrochemical self-doping, ACS Appl. Mater. Interfaces, 7 (2015) 7486–7491.
  16. S.-Y. Kwak, S.H. Kim, S.S. Kim, Hybrid organic/inorganic reverse osmosis (RO) membrane for bactericidal anti-fouling. 1. Preparation and characterization of TiO2 nanoparticle selfassembled aromatic polyamide thin-film-composite (TFC) membrane, Environ. Sci. Technol., 35 (2001) 2388–2394.
  17. S.H. Kim, S.-Y. Kwak, B.-H. Sohn, T.H. Park, Design of TiO2 nanoparticle self-assembled aromatic polyamide thin-filmcomposite (TFC) membrane as an approach to solve biofouling problem, J. Membr. Sci., 211 (2003) 157–165.
  18. S.S. Madaeni, N. Ghaemi, Characterization of self-cleaning RO membranes coated with TiO2 particles under UV irradiation, J. Membr. Sci., 303 (2007) 221–233.
  19. Y. Takahashi, Y. Wada, Dip‐coating of Sb‐doped SnO2 films by ethanolamine‐alkoxide method, J. Electrochem. Soc., 137 (1990) 267–272.
  20. D.J. Kim, S.H. Hahn, S.H. Oh, E.J. Kim, Influence of calcination temperature on structural and optical properties of TiO2 thin films prepared by sol–gel dip coating, Mater. Lett., 57 (2002) 355–360.
  21. R.S. Sonawane, B.B. Kale, M.K. Dongare, Preparation and photo-catalytic activity of Fe–TiO2 thin films prepared by sol– gel dip coating, Mater. Chem. Phys., 85 (2004) 52–57.
  22. S. Kahraman, S. Çetinkaya, H.A. Çetinkara, H.S. Güder, Effects of diethanolamine on sol–gel–processed Cu2ZnSnS4 photovoltaic absorber thin films, Mater. Res. Bull., 50 (2014) 165–171.
  23. C. Kim, J. Lee, S. Kim, J. Yoon, TiO2 sol–gel spray method for carbon electrode fabrication to enhance desalination efficiency of capacitive deionization, Desalination, 342 (2014) 70–74.
  24. Y. Baek, J. Yu, S.-H. Kim, S. Lee, J. Yoon, Effect of surface properties of reverse osmosis membranes on biofouling occurrence under filtration conditions, J. Membr. Sci., 382 (2011) 91–99.
  25. H.J. Kim, D.-G. Kim, H. Yoon, Y.-S. Choi, J. Yoon, J.-C. Lee, Polyphenol/FeIII complex coated membranes having multifunctional properties prepared by a one‐step fast assembly, Adv. Mater. Interfaces, 2 (2015) 1500298.
  26. D.-G. Kim, H. Kang, S. Han, J.-C. Lee, The increase of antifouling properties of ultrafiltration membrane coated by star-shaped polymers, J. Mater. Chem., 22 (2012) 8654–8661.
  27. J.D. Grunwaldt, U. Göbel, A. Baiker, Preparation and characterization of thin TiO2-films on gold/mica, Fresenius’ J. Anal. Chem., 358 (1997) 96–100.
  28. C. Chen, H. Bai, C. Chang, Effect of plasma processing gas composition on the nitrogen-doping status and visible light photocatalysis of TiO2, J. Phys. Chem. C, 111 (2007) 15228–15235.
  29. M.Z. Atashbar, H.T. Sun, B. Gong, W. Wlodarski, R. Lamb, XPS study of Nb-doped oxygen sensing TiO2 thin films prepared by sol-gel method, Thin Solid Films, 326 (1998) 238–244.
  30. P.Y. Jouan, M.C. Peignon, C. Cardinaud, G. Lempérière, Characterisation of TiN coatings and of the TiN/Si interface by X-ray photoelectron spectroscopy and Auger electron spectroscopy, Appl. Surf. Sci., 68 (1993) 595–603.
  31. W. Zhang, J. Shi, X. Wang, Z. Jiang, X. Song, Q. Ai, Conferring an adhesion layer with mineralization-inducing capabilities for preparing organic–inorganic hybrid microcapsules, J. Mater. Chem. B, 2 (2014) 1371–1378.
  32. N. Nakayama, T. Hayashi, Preparation and characterization of poly(l-lactic acid)/TiO2 nanoparticle nanocomposite films with high transparency and efficient photodegradability, Polym. Degrad. Stab., 92 (2007) 1255–1264.
  33. K. Yamamoto, Y. Koga, S. Fujiwara, XPS studies of amorphous SiCN thin films prepared by nitrogen ion-assisted pulsed-laser deposition of SiC target, Diamond Relat. Mater., 10 (2001) 1921–1926.
  34. L. Matuana, J. Balatinecz, R. Sodhi, C. Park, Surface characterization of esterified cellulosic fibers by XPS and FTIR spectroscopy, Wood Sci. Technol., 35 (2001) 191–201.
  35. S. Delpeux, F. Beguin, R. Benoit, R. Erre, N. Manolova, I. Rashkov, Fullerene core star-like polymers—1. Preparation from fullerenes and monoazidopolyethers, Eur. Polym. J., 34 (1998) 905–915.
  36. J. Charlier, V. Detalle, F. Valin, C. Bureau, G. Lecayon, Study of ultrathin polyamide-6, 6 films on clean copper and platinum, J. Vacuum Sci. Technol. A, 15 (1997) 353–364.
  37. V. Wiertz, P. Bertrand, Identification of the N-containing functionalities introduced at the surface of ammonia plasma treated carbon fibres by combined ToF-SIMS and XPS, 1998.
  38. G. Parfitt, The surface of titanium dioxide, Prog. Surf. Membr. Sci, 11 (1976) 181–226.
  39. T. Hanawa, M. Kon, H. Doi, H. Ukai, K. Murakami, H. Hamanaka, K. Asaoka, Amount of hydroxyl radical on calciumion- implanted titanium and point of zero charge of constituent oxide of the surface-modified layer, J. Mater. Sci. Mater. Med., 9 (1998) 89–92.
  40. K. Suttiponparnit, J. Jiang, M. Sahu, S. Suvachittanont, T. Charinpanitkul, P. Biswas, Role of surface area, primary particle size, and crystal phase on titanium dioxide nanoparticle dispersion properties, Nanoscale Res. Lett., 6 (2011) 1–8.
  41. S. Sablani, M. Goosen, R. Al-Belushi, M. Wilf, Concentration polarization in ultrafiltration and reverse osmosis: a critical review, Desalination, 141 (2001) 269–289.
  42. E. Matthiasson, B. Sivik, Concentration polarization and fouling, Desalination, 35 (1980) 59–103.
  43. J. Cho, G. Amy, J. Pellegrino, Membrane filtration of natural organic matter: comparison of flux decline, NOM rejection, and foulants during filtration with three UF membranes, Desalination, 127 (2000) 283–298.