References

  1. C. Yun, R. Prasad, K.K. Sirkar, Hollow fi ber solvent extraction removal of toxic heavy metals from aqueous waste streams, Ind. Eng. Chem. Res., 32 (1993) 1186–1194.
  2. M. Yang, E. Cussler, Reaction dependent extraction of copper and nickel using hollow fi bers, J. Membr. Sci., 166 (2000) 229–238.
  3. R.S. Juang, H.L. Huang, Modeling of nondispersive extraction of binary Zn(II) and Cu(II) with D2EHPA in hollow fi ber devices, J. Membr. Sci., 208 (2002) 31–38.
  4. M.J. Gonzalez-Mufioz, S. Luque, J.R. Alvarez, J. Coca, Simulation of integrated extraction and stripping processes using membrane contactors, Desalination, 163 (2004) 1–12.
  5. A. Kiani, R.R. Bhave, K.K. Sirkar, Solvent extraction with immobilized interfaces in a microporous hydrophobic membrane, J. Membr. Sci., 20 (1984) 125–145.
  6. S.B. Iversen, V.K. Bhatia, K. Dam-Johansen, G. Jonsson, Characterisation of microporous membranes for use in membrane contactors, J. Membr. Sci., 130 (1997) 205–217.
  7. A.K. Pabby, A.M. Sastre, Hollow Fiber Membrane-Based Separation Technology: Performance and Design Perspectives, M. Aguilar, J.L. Cortina, Eds., Solvent Extraction and Liquid Membranes, Taylor & Francis Group, LLC, New York, 2008, pp. 91–140.
  8. R. Prasad, K.K. Sirkar, Membrane-Based Solvent Extraction, W.S.W. Ho, K.K. Sirkar, Eds., Membrane Handbook, Chapman & Hall, New York, 1992, pp. 727–763.
  9. M.C. Yang, E.L. Cussler, Designing hollow fiber contactors, AIChE J., 32 (1986) 1910–1915.
  10. A. Gabelman, S.T. Hwang, Hollow fiber membrane contactors, J. Membr. Sci., 159 (1999) 61–106.
  11. A.K. Pabby, A.M. Sastre, State-of-the-art review on hollow fi ber contactor technology and membrane-based extraction processes, J. Membr. Sci., 430 (2013) 263–303.
  12. E. Bringas, S.M.F. Rom, J.A. Rabien, I. Ortiz, An overview of the mathematical modeling of liquid membrane separation processes in hollow fi bre contactors, J. Chem. Technol. Biotechnol., 84 (2009) 1583–1614.
  13. S.B. Hu, J.M. Wiencek, Emulsion-liquid membrane extraction of copper using a hollow fi ber contactor, AIChE J., 44 (1998) 570–58.
  14. A.M. Urtiaga, M.J. Abellan, J.A. Irabien, I. Ortiz, Membrane contactors for the recovery of metallic compounds: modelling of copper recovery from WPO processes, J. Membr. Sci., 257 (2005) 161–170.
  15. B. Sengupta, M.S. Bhakhar, R. Sengupta, Extraction of copper from ammoniacal solutions into emulsion liquid membranes using LIX 84-I, Hydrometallurgy, 89 (2007) 311–318.
  16. M. Younas, S.D. Bocquet, J. Sanchez, Experimental and theoretical mass transfer transient analysis of copper extraction using HFMCs, J. Membr. Sci., 82 (2011) 70–81.
  17. M. Younas, S.D. Bocquet, J. Romero, J. Sanchez, Experimental and theoretical investigation of distribution equilibria and kinetics of copper (II) extraction with LIX 84-I and TFA, Sep. Sci. Technol., 50 (2015) 1523–1531.
  18. R.S. Juang, H.L. Huang, Mechanistic analysis of solvent extraction of heavy metals in membrane contactors, J. Membr. Sci., 213 (2003) 125–135.
  19. S.D. Bocquet, A. Torres, J. Sanchez, G.M. Rios, J. Romero, Modeling the mass transfer in solvent extraction processes with hollow-fiber membranes, AIChE J., 51 (2005) 1067–1079.
  20. R. Ghidossi, D. Veyret, P. Moulin, Computational fluid dynamics applied to membranes: state of the art and opportunities, Chem. Eng. Process., 45 (2006) 437–454.
  21. R. Kieffer, C. Charcosset, F. Puel, D. Mangin, Numerical simulation of mass transfer in a liquid-liquid membrane contactor for laminar flow conditions, Comput. Chem. Eng., 32 (2008) 1325–1333.
  22. A. Cipollina, G. Micale, I. Rizzuti, Membrane distillation heat transfer enhancement by CFD analysis of internal module geometry, Desal. Wat. Treat., 5 (2011) 195–209.
  23. J. Oh, D. Jeong, I. Yum, Y. Lee, A numerical analysis for CO2 recovery from aqueous absorbent solution by hollow fiber membrane contactor, Desal. Wat. Treat., 17 (2010) 218–226.
  24. R. Faiz, M. Al-Marzouqi, CO2 removal from natural gas at high pressure using membrane contactors: model validation and membrane parametric studies, J. Membr. Sci., 365 (2010) 232–241.
  25. M.R. Sohrabi, A. Marjani, S. Shirazian, S. Moradi, Acetone and ethanol extraction from water by means of membrane: modeling and numerical simulation, Middle East J. Sci. Res., 7 (2011) 530–537.
  26. S.M.R. Razavi, S.M.J. Razavi, T. Miri, S. Shirazian, CFD simulation of CO2 capture from gas mixtures in nanoporous membranes by solution of 2-amino-2-methyl-1-propanol and piperazine, Int. J. Greenhouse Gas Control, 15 (2013) 142–149.
  27. M. Al-Marzouqi, M. El-Naas, S. Marzouk, N. Abdullatif, Modeling of chemical absorption of CO2 in membrane contactors, Sep. Purif. Technol., 62 (2008) 499–506.
  28. M. Al-Marzouqi, M.H. El-Naas, S.A.M. Marzouk, M.A. Al-Zarooni, N. Abdullatif, R. Faiz, Modeling of CO2 absorption in membrane contactors, Sep. Purif. Technol., 59 (2008) 286–293.
  29. M. Rezakazemi, Z. Niazi, M. Mirfendereski, S. Shirazian, T. Mohammadi, A. Pak, CFD simulation of natural gas sweetening in a gas–liquid hollow-fi ber membrane contactor, Chem. Eng. J., 168 (2011) 1217–1226.
  30. M. Mahdavian, H. Atashi, M. Zivdar, M. Mousavi, Simulation of CO2 and H2S removal using methanol in hollow fiber membrane gas absorber (HFMGA), Adv. Chem. Eng. Sci., 2 (2012) 50–61.
  31. A. Marjani, S. Shirazian, Application of CFD techniques for prediction of NH3 transport through porous membranes, Orient. J. Chem., 28 (2012) 67–72.
  32. M. Rezakazemi, S. Shirazian, S.N. Ashrafi zadeh, Simulation of ammonia removal from industrial wastewater streams by means of a hollow-fi ber membrane contactor, Desalination, 285 (2012) 383–392.
  33. N. Nosratinia, M. Ghadiri, H. Ghahremani, Mathematical modeling and numerical simulation of ammonia removal from wastewaters using membrane contactors, J. Ind. Eng. Chem., 20 (2014) 2958–2963.
  34. M. Ghadiri, S. Sherazian, Computational simulation of mass transfer in extraction of alkali metals, Chem. Eng. Process., 69 (2013) 57–62.
  35. F. Fadaei, S. Shirazian, S.N. Ashrafi zadeh, Mass transfer simulation of solvent extraction in hollow-fi ber membrane contactors, Desalination, 275 (2011) 126–132.
  36. R. Rigglo, H.E. Martinez, H.N. Solimo, Densities, viscosities, and refractive indexes for the methyl isobutyl ketone + pentanols systems. Measurements and correlations, J. Chem. Eng. Data, 31 (1986) 225–238.
  37. M.A.F. Faria, C.F. De-Sa, G.R. Lima, J.I.B.C. Filho, R.J. Martins, J.E.De-M. Car-doso, O.E. Barcia, Measurement of density and viscosity of binary 1-alkanol systems (C8–C11) at 101 kPa and temperatures from (283.15 to 313.5) K, J. Chem. Eng. Data, 50 (2005) 1938–1943.
  38. V. Mutalik, L.S. Manjeshwar, M. Sairam, T.M. Aminabhavi, Thermodynamic properties of (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisol) binary mixtures at T = (298.15, 303.15, and 308.15) K, J. Chem. Thermodyn., 38 (2006) 1062–1071.
  39. C.B. Patil, P.K. Mohapatra, V.K. Manchanda, Transport of thorium from nitric acid solution by non-dispersive solvent extraction using a hollow fibre contactor, Desalination, 232 (2008) 272–279.
  40. M. Younas, S.D. Bocquet, J. Sanchez, Kinetic and dynamic study of liquid-liquid extraction of copper in a HFMC: experimentation, modeling, and simulation, AIChE J., 56 (2011) 1469–1480.
  41. R.B. Bird, W.E. Stewart, E.N. Lightfoot, Transport Phenomena, 2nd ed., John Wiley & Sons, New York, 1960.
  42. M. Fasihi, S. Shirazian, A. Marjani, M. Rezakazemi, Computational fluid dynamics simulation of transport phenomena in ceramic membranes for SO2 separation, Math. Comput. Modell., 56 (2012) 278–286.
  43. M. Saeed, L. Deng, CFD Modeling of Hollow Fiber Membrane Contactor for Post-Combustion CO2 Capture, 2nd Post Combustion Capture Conference (PCCC2), Bergen, Norway, 2013.
  44. A. Marjani, S. Shirazian, Simulation of heavy metal extraction in membrane contactors using computational fluid dynamics, Desalination, 281 (2011) 422–428.
  45. S.D. Bocquet, F.G. Viladomat, C.M. Nova, J. Sanchez, V. Athes, I. Souchon, Membrane-based solvent extraction of aroma compounds: choice of confi gurations of hollow fi ber modules based on experiments and simulation, J. Membr. Sci., 281 (2006) 358–368.