References

1. http://www.tradearabia.com/news/CONS_270037.html
2. Desal Data Source.
3. J.W. Oldfield, B. Todd, The use of stainless steels and related alloys in reverse osmosis desalination plants, Desalination, 55 (1985) 261–280.
4. A.M. Hassan, A.U. Malik, Corrosion resistrant materials for seawater RO plants, Desalination, 74 (1989) 157–170.
5. N. Larché, P. Dezerville, Review of material selection and corrosion in seawater reverse osmosis desalination plants, Desal. Wat. Treat., 31 (2011) 121–133.
6. F.M. Mubeen, Past and Present SWRO Desalination Plants – A Material Perspective, Proc. World Congress on Desalination and Water Re-Use, Singapore, 2005, IDA.
7. A.M. Hassan, S. Al-Jarrah, T. Al-Lohibi, L.M. Bakheet, A.I. Amri, Performance Evaluation of SWCC SWRO Plants, Proc. World Congress on Desalination and Water Re-Use, Kuwait, 1999, IDA.
8. J.O. Olsson, M.M. Snis, Don’t Repeat Mistakes! An SWRO Plant Case Study, Proc. World Congress on Desalination and Water Re-Use, Singapore, 2005, IDA.
9. J. Olsson, K. Cosic, Stainless Steels for SWRO Plants High Pressure Piping, Properties and Experience. Proc. World Congress on Desalination and Water Re-Use, Bahamas, 2003, IDA.
10. R.G. Kelly, Corrosion: Fundamentals, Testing, and Protection, Vol. 13A, ASM Handbook, ASM International, 2003, pp. 242–247.
11. R.M. Kain, Corrosion: Fundamentals, Testing, and Protection, Vol. 13A, ASM Handbook, ASM International, 2003, pp. 549–561.
12. F.L. LaQue, Crevice Corrosion, Marine Corrosion Causes and Prevention, John Wiley & Sons, Inc., 1975.
13. J.W. Oldfield, R.M. Kain, Prediction of Crevice Corrosion Resistance of Stainless Steels in Aqueous Environments: A Corrosion Engineering Guide. Proc. 12th International Corrosion Congress, Houston, TX, September 19–24, 1993, 1876–1888.
14. N. Corlette, L.E. Eiselstein, N. Budiansky, Shreir’s Corrosion by T. Richardson, 1st ed., Elsevier, 2009, 753–771.
15. A.U. Malik, N.A. Siddiqi, S. Ahmad, I.N. Andijani, The effect of dominant alloy additions on the corrosion behavior of some conventional and high alloy stainless steels in seawater, Corr. Sci. 37 (1995) 1521–1535.
16. A.U. Malik, N.A. Siddiqi, I.N. Andijani, Corrosion behaviour of some highly alloyed stainless steels in seawater, Desalination, 97 (1994) 189–197.
17. A. AI-Odwani, J. Carew, A. A1-Hashem, The Crevice Corrosion Behavior of Chromium Stainless Steel and Nickel Base Alloys in a Reverse Osmosis Plant Utilizing Seawater, Paper No. 326, NACE International Corrosion, San Antonio, Texas, 1999.
18. A. Al-Odwani, A. AI-Hijji, M. Al-Tabtabaei, M. Al-Ragheeb, Suitability of high Cr-Mo-Ni alloys for the construction of seawater reverse osmosis plants in Kuwait, Desalination, 153 (2002) 207–216.
19. A. Tumbull, Impact of graphite gasket/duplex stainless steel couples on crevice chemistry and likelihood of crevice attack in seawater, Paper N°682, NACE International Corrosion, San Diego, California, 1998.
20. R.M. Kain, Gasket Materials and Other Factors Influencing the Crevice Corrosion Resistance of Stainless Steel Flanges, Paper N°702, NACE International Corrosion, San Diego, California, 1998.
21. S.P. White, G.J. Weir, N.J. Laycock, Calculating chemical concentrations during initiation of crevice corrosion, Corr. Sci., 42 (2000) 606–629.
22. J.L. Mousson, B. Vuillemin, R. Oltra, R.A. Cottis, Use of a General Purpose Finite Element Package for Modeling of Crevice Corrosion, Paper N°04066, NACE International Corrosion, New Orleans, 2004.
23. H.J. Zhang, S.C. Dexter, Effect of Biofilms on Crevice Corrosion of Stainless Steels in Costal Seawater, Corr., 51 (1995) 56–66.
24. N. Larché, P. Boillot, P. Dézerville, E. Johansson, J.M. Lardon, D. Thierry, Crevice Corrosion Performance of High Alloy Stainless Steels and Ni-Based Alloy in Desalination Industry. Proc. World Congress on Desalination and Water Re-Use, China, 2013, IDA.
25. G. Salvago, L. Magagnin, Biofilm effect on the cathodic and anodic processes on stainless steel in seawater near the corrosion potential: Part 1 — corrosion potential, Corr., 57 (2001) 680–692.
26. S.C. Dexter, G.Y. Gao, Effect of seawater biofilms on corrosion potential and oxygen reduction of stainless steel, Corr., 44 (1988) 717–723.
27. V. Scotto, R. Di Cintio, G. Marcenaro, The influence of marine aerobic microbial film on stainless steel corrosion behavior, Corr. Sci., 25 (1985) 185–194.
28. R. Johnsen, E. Bardal, Cathodic properties of different stainless steels in natural seawater, Corr., 41 (1985) 296–302.
29. S. Motoda, Y. Suzuki, T. Shinohara, The effect of marine fouling on the ennoblement of electrode potential for stainless steels, Corr. Sci., 31 (1990) 515–520.
30. M. Mollica, A. Trevis, Corrélation Entre la Formation de la Pellicule Primaire et la Modification de la Cathodique sur des Aciers Inoxydables Expérimentés en eau de Mer aux Vitesses de 0.3 a 5.2 m/s, Proc. 4th Int. Cong. Marine Corrosion and Fouling, Juan-Les-Pins, Antibes, France, 1996.
31. U. Kivisakk, B. Espelid, D. Féron, Methodology of Crevice Corrosion Testing for Stainless Steels in Natural and Treated Seawaters. EFC Publication No. 60, 2010.
32. R. Sriram, D. Tromans, Pitting corrosion of duplex stainless steels, Corr., 45 (1989) 804–810.
33. H. Yakuwa, M. Miyasaka, K. Sujiyama, K. Mitsuhashi, Evaluation of Crevice Corrosion Resistance of Duplex and Superduplex Stainless Steels for Seawater Pumps, Paper No. 09194, NACE International Corrosion, Texas, 2009.
34. A.U. Malik, I. Andijani, A.M. Jamaluddin, S. Ahmed, Crevice corrosion behavior of high-alloy stainless steels in a SWRO pilot plant, Desalination, 171 (2004) 289–298.
35. S. Funani, A. Bairamov, Experience With Standard Duplex Stainless Steel Cooling Water Pump in the Arabian Gulf Seawater Conditions, Paper N°3733, NACE International Corrosion, Texas, 2014.
36. S.M. Sharland, A review of the theoretical modeling of crevice and pitting corrosion, Corr. Sci., 27 (1987) 289–323.
37. M.K. Watson, J. Postlethwaite, Numerical simulation of crevice corrosion: the effect of crevice gap profile, Corr. Sci., 32 (1991) 1253–1262.
38. T.S. Lee, R.M. Kain, Factors Influencing the Crevice Corrosion Behavior of Stainless Steels in Seawater, Paper N°69, NACE International Corrosion, Texas, 1983.
39. R.M. Kain, R.J. Ferrara, P.A. Klein, Crevice Corrosion Resistance of Several Nickel-Based Chromium Plus Molybdenum Alloys in Natural and Chlorinated Seawater, CORROSION/88, Paper No. 112, Houston, TX: NACE, 1988.
40. F.J. Martin, P.M. Natishan, K.E. Lucas, E.A. Hogan, A.M. Grolleau, E.D. Thomas, Crevice Corrosion of Alloy 625 in Natural Seawater, Corr., 59 (2003) 498–204.
41. A.M. Grolleau, H. Le Guyader, V. Debout, Prediction of Service Life of Nickel Based Alloys N06625 and N06059 and Super Austenitic Stainless Steel S31266 in Seawater Using In-House Crevice Corrosion Tests, Nace corrosion, Paper No. 09192, 2009.
42. N. Larché, H. Iken, D. Thierry, Monitoring of Seawater Biofilms on Stainless Steel for Corrosion Risk Assessment, Stainless Steel World, Maastricht, The Netherlands, 2011.