References

1. W. Stumm, C.R. O’Melia, Stoichiometry of coagulation, J. AWWA, 60(5) (1968) 531.
2. Z. Song, C.J. Willians, R.G.J. Edyvean, Treatment of tannery wastewater by chemical coagulation, Desalination, 164 (2004) 249–259.
3. G. Lafrano, V. Belgiorno, M. Gallo, A. Ramio, S. Meric, Toxicity reduction in leather tanning wastewater by improved coagulation flocculation process, Global Nest J., 8(2) (2006) 151–158.
4. G. Lofrano, S. Meric, D. Orhon, Chemical and biological treatment technologies for leather tannery chemicals and wastewaters: a review, Sci. Total Environ., 461 (2013) 265–281.
5. J. Duan, J. Gregory, Coagulation by hydrolysing metal salts, Adv. Colloid Interf., 100–102 (2003) 475–502.
6. O.Y. Balik, S. Aydin, Coagulation/flocculation optimization and sludge production for pre-treatment of paint industry wastewater, Desal. Water Treat., 57(27) (2016) 12692–12699.
7. S. Haydar, J.A. Aziz, Characterization and treatability studies of tannery wastewater using chemically enhanced primary treatment (CEPT)—a case study of Saddiq Leather Works, J. Hazard. Mater., 163 (2008) 1076–1083.
8. Standard Methods for the Examination of Water and Wastewater, 20th ed., APHA, American Water Works Association, Washington DC, USA, 1998.
9. S. Haydar, J.A. Aziz, Coagulation flocculation studies of tannery wastewater using cationic polymers as a replacement of metal salts, Water Sci. Technol., 59(2) (2009) 381–390.
10. S.S. Wong, T.T. Teng, A.L Ahmad, A. Zuhairi, G. Najafpour, Treatment of pulp and paper mill wastewater by polyacrylamide (PAM) in polymer induced flocculation, J. Hazard. Mater., B 135 (2006) 378–388.
11. E.L. Bean, Zeta Potential measurements in the control of coagulation chemical dose, J. AWWA, 56(2) (1964) 214.
12. TNPCB, 2017 ─ http://www.tnpcb.gov.in/pdf/tnpcb_you2013.pdf.
13. Y. Zeng, C. Yang, J. Zhang, W. Pu, Feasibility investigation of oily wastewater treatment by combination of zinc and PAM in coagulation/flocculation, J. Hazard. Mater., 147 (2007) 991–996.