References

  1. H. Yamamura, K. Kimura, Y. Watanabe, Mechanism involved in the evolution of physically irreversible fouling in microfiltration and ultrafiltration membrane used for drinking water treatment, Environ. Sci. Technol., 41 (2007) 6789–6794.
  2. P.I. Shen, The effects of friction on the flow distribution in diving and combing flow manifold, J Fluids Eng., 114 (1992) 121–124.
  3. S.H. Choi, S. Shin, Y.I. Cho, The effect of area ratio on the flow distribution in liquid cooling module manifolds for electronic packaging, Int. Commun. Heat Mass Transfer, 20 (1993) 221–234.
  4. A.B. Datta, A.K. Majumdar, Flow distribution in parallel and reverse flow manifolds, Int. J. Heat Mass Transfer, 2 (1990) 253–262.
  5. A. Eguchi, M. Kuragasaki, Y. Sueoka, Performance Improvement on ACDEFLO Headbox of Paper Machine, Mitsubishi Heavy Industries Technical Review, Vol. 25, 1988, pp. 191–196.
  6. J.C. Hong, J.B. Riggs, Flow distribution in tapered, rectangular cross section manifolds, J. Chin. Inst. Chem. Eng., 18 (1987) 193–202.
  7. W. Ding, Application of CFD in Membrane Technique, Doctor Dissertation, Universität Duisburg-Essen, 2012.
  8. A.C.C. Paul, S. Jean, S. Jürgen, W. Brian, Flow distribution in proton exchange membrane fuel cell stacks, J. Power Sources, 162 (2006) 340–355.
  9. H. Peng, P. Linfa, Z. Weigang, L. Xinmin, Optimization design of slotted-interdigitated channel for stamped thin metal bipolar plate in proton exchange membrane fuel cell, J. Power Sources, 187 (2009) 407–414.
  10. S. Maharudrayya, S. Jayanti, A.P. Deshpande, Pressure drop and flow distribution in multiple parallel-channel configurations used in proton-exchange membrane fuel cell stacks, J. Power Sources, 157 (2006) 358–367.
  11. M. Seo, H. Chang, Computational study on design of the AIG for the enhancement of ammonia injection in the SCR system, Clean Technol., 18 (2012) 410–418.
  12. E. Poursaeidi, M. Arablu, Using CFD to study combustion and steam flow distribution effects on reheater tubes operation, J. Fluids Eng., 133 (2011) 1–11.
  13. A. Muhana, D.R. Novog, Validation of Fluent for Prediction of Flow Distribution and Pressure Gradients in a Multi-branch Header under Low Flow Conditions, Proc. 16th International Conference on Nuclear Engineering, ICONE16, May 11–15, Orlando, Florida, USA, 2008.
  14. J. Park, S. Kim, Y. Jeong, S. Yoon, N. Park, Effects of inlet flow distribution evenness on outlet water quality from multiple parallel-arrayed sedimentation basins, Desal. Wat. Treat., 61 (2017) 120–125.
  15. T.H. Im, Y.G. Son, Water quality analysis in Nakdong River tributaries, J. Environ. Sci. Int., 25 (2016) 1661–1671.
  16. J.N. Kwon, Characteristic of long term variation of the water quality at the waters of Goseong bay, J. Korean Soc. Mar. Environ. Energy., 13 (2010) 279–287.
  17. ANSYS Corp, Ansys CFX-Solver Modeling Guide Release 15.0, Canonsburg, USA, 2013.
  18. N. Park, S. Kim, Y. Lee, C. Wang, Effects of longitudinal baffles on particles settling in a sedimentation basin, Water Sci. Technol., 69 (2014) 1212–1218.