References

  1. J. Long, H. Li, Z. Xu, J.H. Masliyah, Improving oil sands processability using a temperature-sensitive polymer, Energy Fuels, 25 (2011) 701–707.
  2. M.A. Shannon, P.W. Bohn, M. Elimelech, J.G. Georgiadis, B.J. Mariñas, A.M. Mayes, Science and technology for water purification in the coming decades, Nature, 452 (2008) 301–311.
  3. W. Zhang, Z. Shi, F. Zhang, X. Liu, J. Jin, L. Jiang, Superhydrophobic and superoleophilic PVDF membranes for effective separation of water-in-oil emulsions with high flux, Adv. Mater., 25 (2013) 2071–2076.
  4. J. Song, Y. Lu, J. Luo, S. Huang, L. Wang, W. Xu, I.P. Parkin, Barrel-shaped oil skimmer designed for collection of oil from spills, Adv. Mater. Interfaces, 2 (2015) 1500350–1500357.
  5. J.L. Schnoor, The Gulf oil spill, Environ. Sci. Technol., 44 (2010) 4833.
  6. D. Wu, W. Wu, Z. Yu, C. Zhang, H. Zhu, Facile preparation and characterization of modified polyurethane sponge for oil absorption, Ind. Eng. Chem. Res., 53 (2014) 20139–20144.
  7. D. Wu, F. Xu, B. Sun, R. Fu, H. He, K. Matyjaszewski, Design and preparation of porous polymers, Chem. Rev., 112 (2012) 3959–4015.
  8. Y. Wu, C. Zhou, S. Xue, C. Li, Y. Lin, Z. Zheng, X. Ding, Preparation and oil absorption of magnetic and porous materials based on carboxymethyl cellulose sodium modified polyurethane foams, Acta Polym. Sinica, 3 (2017) 516–523.
  9. A. Zhang, M. Chen, H. Guo, H. Bai, L. Li, Poly(dimethylsiloxane) oil absorbent with a three-dimensionally interconnected porous structure and swellable skeleton, ACS Appl. Mater. Interfaces, 5 (2013) 10201–10206.
  10. Y. Wu, S. Xue, H. Yang, H. Zhang, T. Zhang, S. Gou, Polymerization-induced phase separation for the fabrication of magnetic sponges for oil spill reclamation, Chem. Eng. J., 328 (2017) 639–644.
  11. Y. Wu, H. Yang, Y. Lin, Z. Zheng, X. Ding, Magnetic responsive oil-absorbing polymeric resins based on 4-tert-butyl-styrene and methyl methacrylate, Acta Polym. Sinica, 9 (2016) 1599–1605.
  12. Y. Wu, C. Zhou, L. Guo, Y. Lin, Z. Zheng, X. Ding, Preparation and oil absorption of magnetically carbonized foams based on waste polyurethane foams, Acta Polym. Sinica, 4 (2016) 402–408.
  13. S. Yu, H. Tan, J. Wang, X. Liu, K. Zhou, High porosity supermacroporous polystyrene materials with excellent oil– water separation and gas permeability properties, ACS Appl. Mater. Interfaces, 7 (2015) 6745–6753.
  14. M.S. Silverstein, Recent advances in emulsion-templated porous polymers, Prog. Polym. Sci., 39 (2014) 199–234.
  15. T. Zhang, Z. Xu, Q. Guo, Closed-cell and open-cell porous polymers from ionomer-stabilized high internal phase emulsions, Polym. Chem., 7 (2016) 7469–7476.
  16. T. Zhang, Q. Guo, Continuous preparation of polyHIPE monoliths from ionomer-stabilized high internal phase emulsions (HIPEs) for efficient recovery of spilled oils, Chem. Eng. J., 307 (2017) 812–819.
  17. Y. Wu, T. Zhang, Z. Xu, Q. Guo, High internal phase emulsion (HIPE) xerogels for enhanced oil spill recovery, J. Mater. Chem. A., 3 (2015) 1906–1909.
  18. T. Zhang, Q. Guo, High internal phase emulsion (HIPE) organogels prepared from charge-driven assembled polymer organogels, Chem. Commun., 49 (2013) 11803–11805.
  19. N. Zhang, S. Zhong, X. Zhou, W. Jiang, T. Wang, J. Fu, Superhydrophobic P (St-DVB) foam prepared by the high internal phase emulsion technique for oil spill recovery, Chem. Eng. J., 298 (2016) 117–124.
  20. T Zhang, Y. Wu, Z. Xu, Q. Guo, Hybrid high internal phase emulsion (HIPE) organogels with oil separation properties, Chem. Commun., 50 (2014) 13821–13824.
  21. S. Wu, S. Peng, N. Hameed, Q. Guo, Y.W. Mai, A new route to nanostructured thermosets with block ionomer complexes, Soft Matter, 8 (2012) 688–698.
  22. Q. Wang, Y. Lu, N. Li, Preparation, characterization and performance of sulfonated poly (styrene-ethylene/butylenestyrene) block copolymer membranes for water desalination by pervaporation, Desalination, 390 (2016) 33–46.
  23. R.I. Blackwell, K.A. Mauritz, Mechanical creep and recovery of poly(styrene-b-ethylene/butylene-b-styrene) (SEBS), sulfonated SEBS (sSEBS), and sSEBS/silicate nanostructured materials, Polym. Adv. Technol., 16 (2005) 212–220.
  24. T. Zhang, Z. Xu, Z. Cai, Q. Guo, Phase inversion of ionomerstabilized emulsions to form high internal phase emulsions (HIPEs), Phys. Chem. Chem. Phys., 17 (2015) 16033–16039.
  25. D. Kaur, K. Jain, N.K. Mehra, P. Kesharwani, N.K. Jain, A review on comparative study of PPI and PAMAM dendrimers, J. Nanopart. Res., 18 (2016) 146.
  26. R. Esfand, D.A. Tomalia, Poly(amidoamine) (PAMAM) dendrimers: from biomimicry to drug delivery and biomedical applications, Drug Discov. Today, 6 (2001) 427–436.
  27. L. Ma, X. Luo, N. Cai, Y. Xue, S. Zhu, Z. Fu, F. Yu, Facile fabrication of hierarchical porous resins via high internal phase emulsion and polymeric porogen, Appl. Surf. Sci., 305 (2014) 186–193.
  28. S. Sun, S. Tang, X. Chang, N. Wang, D. Wang, T. Liu, Y. Lei, Y. Zhu, A bifunctional melamine sponge decorated with silver-reduced grapheme oxide nanocomposite for oil-water separation and antibacterial applications, Appl. Surf. Sci., 473 (2019) 1049–1061.
  29. X. Yang, L. Tan, L. Xia, C. Wood, B. Tan, Hierarchical porous polystyrene monoliths from PolyHIPE, Macromol. Rapid Commun., 36 (2015) 1553–1558.
  30. P. Lee, M.A. Rogers, Phase-Selective sorbent xerogels as reclamation agents for oil spills, Langmuir, 29 (2013) 5617−5621.
  31. S. Choi, T. Kwon, H. Im, D. Moon, D. Baek, M. Seol, J. Duarte, Y. Choi, A polydimethylsiloxane (pdms) sponge for the selective absorption of oil from water, ACS Appl. Mater. Interfaces, 3 (2011) 4552–4556.
  32. W. Wan, R. Zhang, W. Li, H. Liu, Y. Lin, L. Li, Y. Zhou, Graphene–carbon nanotube aerogel as an ultra-light, compressible and recyclable highly efficient absorbent for oil and dyes, Environ. Sci., 3 (2016) 107–113.