References

  1. S.S. Yoo, I. Choi, S.M. Ji, K.B. Ko, K.H. Chu, Operating cost reduction of UF membrane filtration process for drinking water treatment attributed to chemical cleaning optimization, J. Environ. Manage., 206 (2018) 1126–1134.
  2. C.M. Chew, M.K. Aroua, M.A. Hussain, Advanced process control for ultrafiltration membrane water treatment system, J. Cleaner Prod., 179 (2018) 63–80.
  3. S.I. Patsios, A.J. Karabelas, An investigation of the long-term filtration performance of a membrane bioreactor (MBR): the role of specific organic fractions, J. Membr. Sci., 372 (2011) 102–115.
  4. H.-H. Chang, L.-K. Chang, C.-D. Yang, D.-J. Lin, L.-P. Cheng, Effect of polar rotation on the formation of porous poly(vinylidene fluoride) membranes by immersion precipitation in an alcohol bath, J. Membr. Sci., 513 (2016) 186–196.
  5. M.-m. Tao, F. Liu, B.-r. Ma, L.-x. Xue, Effect of solvent power on PVDF membrane polymorphism during phase inversion, Desalination, 316 (2013) 137–145.
  6. S.M. Mousavi, A. Zadhoush, Investigation of the relation between viscoelastic properties of polysulfone solutions, phase inversion process and membrane morphology: the effect of solvent power, J. Membr. Sci., 532 (2017) 47–57.
  7. M. Mailvaganam, L. Fabbricino, C.F.F. Rodrigues, A.R. Donnelly, Hollow fiber semipermeable membrane of tubular braid, US5472607, 1995-12-05.
  8. M.-S. Lee, S.-H. Choi, Y.-C. Shin, Braid-reinforced hollow fiber membrane, US7267872B2, 2007-09-11.
  9. X. Zhang, C. Xiao, X. Hu, Q. Bai, Preparation and properties of homogeneous-reinforced polyvinylidene fluoride hollow fiber membrane, Appl. Surf. Sci., 264 (2013) 801–810.
  10. M.J. Kim, B. Sankararao, C.K. Yoo, Determination of MBR fouling and chemical cleaning interval using statistical methods applied on dynamic index data, J. Membr. Sci., 375 (2011) 345–353.
  11. H. Liu, C. Xiao, Q. Huang, X. Hu, Structure design and performance study on homogeneous-reinforced polyvinyl chloride hollow fiber membranes, Desalination, 331 (2013) 35–45.
  12. H. Liu, C. Xiao, Q. Huang, X. Hu, W. Shu, Preparation and interface structure study on dual-layer polyvinyl chloride matrix reinforced hollow fiber membranes, J. Membr. Sci., 472 (2014) 210–221.
  13. Z. Fan, C. Xiao, H. Liu, Q. Huang, J. Zhao, Structure design and performance study on braid-reinforced cellulose acetate hollow fiber membranes, J. Membr. Sci., 486 (2015) 248–256.
  14. H. Wu, Y. Liu, L. Mao, C. Jiang, J. Ang, X. Lu, Doping polysulfone ultrafiltration membrane with TiO2-PDA nanohybrid for simultaneous self-cleaning and self-protection, J. Membr. Sci., 532 (2017) 20–29.
  15. C. Yang, H. Tong, C. Luo, S. Yuan, G. Chen, Y. Yang, Boehmite particle coating modified microporous polyethylene membrane: a promising separator for lithium ion batteries, J. Power Sources, 348 (2017) 80–86.
  16. S. Roualdes, N. Kourda, J. Durand, G. Pourcelly, Plasmagrafted PVDF polymers as anion exchange membranes for the electrotransport of Cr(VI), Desalination, 146 (2018) 273–278.
  17. Z.M. Liu, Z.K. Xu, J.Q. Wang, Q. Yang, J. Wu, P. Seta, Surface modification of microporous polypropylene membranes by the grafting of poly(γ-stearyl-l-glutamate), Eur. Polym. J., 39 (2003) 2291–2299.
  18. H. Zhang, M. Liu, D. Sun, B. Li, P. Li, Evaluation of commercial PTFE membranes for desalination of brine water through vacuum membrane distillation, Chem. Eng. Process., 110 (2016) 52–63.
  19. F. Galiano, K. Briceño, T. Marino, A. Molino, K.V. Christensen, A. Figoli, Advances in biopolymer-based membrane preparation and applications, J. Membr. Sci., 564 (2018) 562–586.
  20. C. Delabarde, C.J.G. Plummer, J.A.E. Månson, Biodegradable polylactide/hydroxyapatite nanocomposite foam scaffolds for bone tissue engineering applications, J. Mater. Sci. - Mater. Med., 23 (2012) 1371–1385.
  21. R.E. Drumright, P.R. Gruber, D.E. Henton, Polylactic acid technology, Adv. Mater., 12 (2000) 1841–1846.
  22. A. Marra, C. Silvestre, D. Duraccio, S. Cimmino, Polylactic acid/zinc oxide biocomposite films for food packaging application, Int. J. Biol. Macromol., 88 (2016) 254–262.
  23. S. Kumar, S. Singh, S. Senapati, A.P. Singh, B. Ray, P. Maiti, Controlled drug release through regulated biodegradation of poly(lactic acid) using inorganic salts, Int. J. Biol. Macromol., 104 (2017) 487–497.
  24. V. Nagarajan, A.K. Mohanty, M. Misra, Perspective on polylactic acid (PLA) based sustainable materials for durable applications: focus on toughness and heat resistance, ACS Sustainable Chem. Eng., 4 (2016) 2899–2916.
  25. A. Moriya, P. Shen, Y. Ohmukai, T. Maruyama, H. Matsuyama, Reduction of fouling on poly(lactic acid) hollow fiber membranes by blending with poly(lactic acid)–polyethylene glycol–poly(lactic acid) triblock copolymers, J. Membr. Sci. 415–416 (2012) 712–717.
  26. H. Minbu, A. Ochiai, T. Kawase, M. Taniguchi, D.R. Lloyd, T. Tanaka, Preparation of poly(L-lactic acid) microfiltration membranes by a nonsolvent-induced phase separation method with the aid of surfactants, J. Membr. Sci., 479 (2015) 85–94.
  27. F.H.H. Abdellatif, J. Babin, C. Arnal-Herault, C. Nouvel, J.-L. Six, A. Jonquieres, Bio-based membranes for ethyl tert-butyl ether (ETBE) bio-fuel purification by pervaporation, J. Membr. Sci., 524 (2017) 449–459.
  28. S. Zereshki, A. Figoli, S.S. Madaeni, S. Simone, J.C. Jansen, M. Esmailinezhad, E. Drioli, Poly(lactic acid)/poly(vinyl pyrrolidone) blend membranes: Effect of membrane composition on pervaporation separation of ethanol/cyclohexane mixture, J. Membr. Sci., 362 (2010) 105–112.
  29. T. Komatsuka, K. Nagai, Temperature dependence on gas permeability and permselectivity of poly(lactic acid) blend membranes, Polym. J., 41 (2009) 455–458.
  30. A. Iulianelli, C. Algieri, L. Donato, A. Garofalo, F. Galiano, G. Bagnato, A. Basile, A. Figoli, New PEEK-WC and PLA membranes for H2 separation, Int. J. Hydrogen Energy, 42 (2017) 22138–22148.
  31. J.E. Mark, Polymer Data Handbook, Oxford University Press, 1999.
  32. V. La Carrubba, F.C. Pavia, V. Brucato, S. Piccarolo, PLLA/PLA scaffolds prepared via thermally induced phase separation (TIPS): tuning of properties and biodegradability, Int. J. Mater. Form., 1 (2008) 619–622.
  33. R. Hu, Y. Pi, N. Wang, Q. Zhang, J. Feng, W. Xu, X. Dong, D. Wang, H. Yang, The formation of the S-shaped edge-on lamellae on the thin porous polylactic acid membrane via phase separation induced by water microdroplets, J. Appl. Polym. Sci., 133 (2016) 6.
  34. T. Tanaka, D.R. Lloyd, Formation of poly(L-lactic acid) microfiltration membranes via thermally induced phase separation, J. Membr. Sci., 238 (2004) 65–73.
  35. S. Chen, Z. He, G. Xu, X. Xiao, Fabrication and characterization of modified nanofibrous poly(L-lactic acid) scaffolds by thermally induced phase separation technique and aminolysis for promoting cyctocompatibility, J. Biomater. Sci., Polym. Ed., 27 (2016) 1058–1068.
  36. W.-L. Chou, D.-G. Yu, M.-C. Yang, C.-H. Jou, Effect of molecular weight and concentration of PEG additives on morphology and permeation performance of cellulose acetate hollow fibers, Sep. Purif. Technol., 57 (2007) 209–219.
  37. E. Saljoughi, M. Amirilargani, T. Mohammadi, Effect of PEG additive and coagulation bath temperature on the morphology, permeability and thermal/chemical stability of asymmetric CA membranes, Desalination, 262 (2010) 72–78.
  38. Z. Fan, C. Xiao, H. Liu, Q. Huang, Preparation and performance of homogeneous braid reinforced cellulose acetate hollow fiber membranes, Cellulose, 22 (2015) 695–707.
  39. A. Gao, F. Liu, H. Shi, L. Xue, Controllable transition from finger-like pores to inter-connected pores of PLLA membranes, J. Membr. Sci., 478 (2015) 96–104.
  40. S.H. Yoo, J.H. Kim, J.Y. Jho, J. Won, S.K. Yong, Influence of the addition of PVP on the morphology of asymmetric polyimide phase inversion membranes: effect of PVP molecular weight, J. Membr. Sci., 236 (2004) 203–207.
  41. B. Chakrabarty, A.K. Ghoshal, M.K. Purkait, Effect of molecular weight of PEG on membrane morphology and transport properties, J. Membr. Sci., 309 (2008) 209–221.
  42. Q. Quan, C. Xiao, H. Liu, Q. Huang, W. Zhao, X. Hu, G. Huan, Preparation and characterization of braided tube reinforced polyacrylonitrile hollow fiber membranes, J. Appl. Polym. Sci., 132 (2015) 14.
  43. M. Chen, C. Xiao, C. Wang, H. Liu, Study on the structural design and performance of novel braid-reinforced and thermostable poly(m-phenylene isophthalamide) hollow fiber membranes, RSC Adv., 7 (2017) 20327–20335.
  44. I. Masselin, X. Chasseray, L. Durand-Bourlier, J.-M. Lainé, P.-Y. Syzaret, D. Lemordant, Effect of sonication on polymeric membranes, J. Membr. Sci., 181 (2001) 213–220.