References

1. M. Farooq, A. Wahid, N. Kobayashi, D. Fujita, S.M.A. Basra, Plant drought stress: effects, mechanisms and management, Agron. Sustainable Dev., 29 (2009) 185–212.
2. D.L. Shaffer, L.H. Arias Chavez, M. Ben-Sasson, S. Romero- Vargas Castrillon, N.Y. Yip, M. Elimelech, Desalination and reuse of high-salinity shale gas produced water: drivers, technologies, and future directions, Environ. Sci. Technol., 47 (2013) 9569–9583.
3. S. Chung, C.D. Seo, J.H. Choi, J. Chung, Evaluation method of membrane performance in membrane distillation process for seawater desalination, Environ. Technol., 35 (2014) 2147–2152.
4. N. Misdan, A.F. Ismail, N. Hilal, Recent advances in the development of (bio)fouling resistant thin film composite membranes for desalination, Desalination, 380 (2016) 105–111.
5. Ihsanullah, T. Laoui, A.M. Al-Amer, A.B. Khalil, A. Abbas, M. Khraisheh, M.A. Atieh, Novel anti-microbial membrane for desalination pretreatment: a silver nanoparticle-doped carbon nanotube membrane, Desalination, 376 (2015) 82–93.
6. H. Baig, M.A. Antar, S.M. Zubair, Performance characteristics of a once-through multi-stage flash distillation process, Desal. Water Treat., 13 (2010) 174–185.
7. B.A. Winfield, The treatment of sewage effluents by reverse osmosis—pH based studies of the fouling layer and its removal, Water Res., 13 (1979) 561–564.
8. S.S. Shenvi, A.M. Isloor, A.F. Ismail, A review on RO membrane technology: developments and challenges, Desalination, 368 (2015) 10–26.
9. A. Teusner, G. Blandin, P. Le-Clech, Augmenting water supply by combined desalination/water recycling methods: an economic assessment, Environ. Technol., 38 (2017) 257–265.
10. F. Hejazi, S.M. Mousavi, Electrospun nanofibrous composite membranes of chitosan/polyvinyl alcohol-polyacrylonitrile: preparation, characterization, and performance, Desal. Water Treat., 57 (2016) 1959–1966.
11. A. Sabir, A. Islam, M. Shafiq, A. Shafeeq, M.T.Z. Butt, N.M. Ahmad, K. Sanaullah, T. Jamil, Novel polymer matrix composite membrane doped with fumed silica particles for reverse osmosis desalination, Desalination, 368 (2015) 159–170.
12. J. Deng, Q. He, Z. Wu, W. Yang, Using glycidyl methacrylate as cross-linking agent to prepare thermosensitive hydrogels by a novel one-step method, J. Polym. Sci., Part A: Polym. Chem., 46 (2008) 2193–2201.
13. R. Sengur-Tasdemir, V. Mokkapati, D.Y. Koseoglu-Imer, I. Koyuncu, Effect of polymer type on characterization and filtration performances of multi-walled carbon nanotubes (MWCNT)-COOH-based polymeric mixed matrix membranes, Environ. Technol., 39 (2018) 1226–1237.
14. N. Haleem, M. Arshad, M. Shahid, M.A. Tahir, Synthesis of carboxymethyl cellulose from waste of cotton ginning industry, Carbohydr. Polym., 113 (2014) 249–255.
15. M.M. Ibrahim, A. Koschella, G. Kadry, T. Heinze, Evaluation of cellulose and carboxymethyl cellulose/poly(vinyl alcohol) membranes, Carbohydr. Polym., 95 (2013) 414–420.
16. Y. Liu, G.H. Koops, H. Strathmann, Characterization of morphology controlled polyethersulfone hollow fiber membranes by the addition of polyethylene glycol to the dope and bore liquid solution, J. Membr. Sci., 223 (2003) 187–199.
17. M. Thürmer, P. Poletto, M. Marcolin, J. Duarte, M. Zeni, Effect of non-solvents used in the coagulation bath on morphology of PVDF membranes, Mater. Res., 17 (2012) 884–890.
18. M. Sivakumar, D.R. Mohan, R. Rangarajan, Y. Tsujita, Studies on cellulose acetate–polysulfone ultrafiltration membranes: I. Effect of polymer composition, Polym. Int., 54 (2005) 956–962.
19. S.A. Paralikar, J. Simonsen, J. Lombardi, Poly(vinyl alcohol)/ cellulose nanocrystal barrier membranes, J. Membr. Sci., 320 (2008) 248–258.
20. M. Ali, M. Zafar, T. Jamil, M.T.Z. Butt, Influence of glycol additives on the structure and performance of cellulose acetate/ zinc oxide blend membranes, Desalination, 270 (2011) 98–104.
21. J.-H. Kim, K.-H. Lee, Effect of PEG additive on membrane formation by phase inversion, J. Membr. Sci., 138 (1998) 153–163.
22. C.J. Sajitha, D.M. Raju, Studies on cellulose acetate‐carboxylated polysulfone blend ultrafiltration membranes, Eur. Polym. J., 38 (2005) 2507–2511.
23. A. Idris, L.K. Yet, The effect of different molecular weight PEG additives on cellulose acetate asymmetric dialysis membrane performance, J. Membr. Sci., 280 (2006) 920–927.
24. B. Han, D. Zhang, Z. Shao, L. Kong, S. Lyu, Preparation and characterization of cellulose acetate/carboxymethyl cellulose acetate blend ultrafiltration membranes, Desalination, 311 (2013) 80–89.
25. M.A. Khan, K.M.I. Ali, S.C. Basu, IR studies of wood plastic composites, J. Appl. Polym. Sci., 49 (1993) 1547–1551.
26. P. Sahoo, S. Swain, N.L. Debsarkar, Preparation, characterization, and properties of unbleached, bleached, and grafted pulps from JRC‐321 variety jute fiber, J. Appl. Polym. Sci., 83 (2002) 1963–1969.
27. X. Liu, W. Yu, Evaluating the thermal stability of high performance fibers by TGA, Appl. Polym. Sci., 99 (2006) 937–944.
28. D. Vial, G. Doussau, The use of microfiltration membranes for seawater pre-treatment prior to reverse osmosis membranes, Desalination, 153 (2003) 141–147.
29. S. Zhao, Z. Wang, X. Wei, B. Zhao, J. Wang, S. Yang, S. Wang, Performance improvement of polysulfone ultrafiltration membrane using PANiEB as both pore forming agent and hydrophilic modifier, J. Membr. Sci., 385–386 (2011) 251–262.
30. S. Mir, T. Yasin, H.M. Siddiqi, G. Murtaza, Thermal, rheological, mechanical and morphological behavior of high density polyethylene and carboxymethyl cellulose blend, J. Polym. Environ., 25 (2017) 1011–1020.
31. K. Wilpiszewska, Z. Czech, Water-soluble pressure-sensitive adhesives containing carboxymethyl starch with improved adhesion to paper, J. Polym. Environ., 26 (2018) 1453–1458.