References

  1. N. Ismail, A. Venault, J.-P. Mikkola, D. Bouyer, E. Drioli, N. Tavajohi, H. Kiadeh, Investigating the potential of membranes formed by the vapor induced phase separation process, J. Membr. Sci., 597 (2019) 117601, doi:10.1016/j. memsci.2019.117601.
  2. M. Omidvar, S.M. Mousavi, M. Soltanieh, A.A. Safekordi, Preparation and characterization of poly (ethersulfone) nanofiltration membranes for amoxicillin removal from contaminated water, J. Environ. Health Sci. Eng., 12 (2014) 2–9.
  3. N.I.M. Nawi, H.M. Chean, N. Shamsuddin, M.R. Bilad, T. Narkkun, K. Faungnawakij, A.L. Khan, Development of hydrophilic PVDF membrane using vapour induced phase separation method for produced water treatment, Membranes, 10 (2020) 121, doi: 10.3390/membranes10060121.
  4. M. Khajouei, M. Najafi, S.A. Jafari, Development of ultrafiltration membrane via in-situ grafting of nano-GO/PSF with anti-biofouling properties, Chem. Eng. Res. Des., 142 (2019) 34–43.
  5. A.M. Diez-Pascual, Tissue engineering bionanocomposites based on poly(propylene fumarate), Polymers, 9 (2017) 260, doi: 10.3390/polym9070260.
  6. F.K. Kasper, K. Tanahashi, J.P. Fisher, A.G. Mikos, Synthesis of poly(propylene fumarate), Nat. Protoc., 4 (2009) 518–525.
  7. S. Bano, A. Mahmood, S.-J. Kim, K.-H. Lee, Graphene oxide modified polyamide nanofiltration membrane with improved flux and antifouling properties, J. Mater. Chem. A, 3 (2015) 2065–2071.
  8. A. Venault, A.J. Jumao-as-Leyba, Z.-R. Yang, S. Carretier, Y. Chang, Formation mechanisms of low-biofouling PVDF/F127 membranes prepared by VIPS process, J. Taiwan Inst. Chem. Eng., 62 (2016) 297–306.
  9. Q. Shi, Y. Su, X. Ning, W. Chen, J. Peng, Z. Jiang, Graft polymerization of methacrylic acid onto polyethersulfone for potential pH-responsive membrane materials, J. Membr. Sci., 347 (2010) 62–68.
  10. B. Liu, C. Chen, C.J. Zhang, Y. Chen, Low-cost antifouling PVC ultrafiltration membrane fabrication with Pluronic F127: effect of additives on properties and performances, Desalination, 307 (2012) 22–33.
  11. Y. Mansourpanah, H. Shahebrahimi, E. Kolvari, PEG-modified GO nanosheets, a desired additive to increasethe rejection and antifouling characteristics of polyamide thinlayer membranes, Chem. Eng. Res. Des., 104 (2015) 530–540.
  12. H. Matsuyama, T. Maki, M. Teramoto, K. Kobayashi, Effect of PVP additive on porous polysulfone membrane formation by immersion precipitation method, Sep. Sci. Technol., 38 (2008) 3449–3458.
  13. J.S. Louie, I. Pinnau, I. Ciobanu, K.P. Ishida, A. Ng, M. Reinhard, Effects of polyether–polyamide block copolymer coating on performance and fouling of reverse osmosis membranes, J. Membr. Sci., 280 (2006) 762–770.
  14. H. Ju, B.D. McCloskey, A.C. Sagle, Y.H. Wu, V.A. Kusuma, B.D. Freeman, Crosslinked poly(ethylene oxide) fouling resistant coating materials for oil/water separation, J. Membr. Sci., 307 (2008) 260–267.
  15. S. Yu, G. Yao, B. Dong, H. Zhu, X. Peng, J. Liu, M. Liu, C. Gao, Improving fouling resistance of thin-film composite polyamide reverse osmosis membrane by coating natural hydrophilic polymer sericin, Sep. Purif. Technol., 118 (2013) 285–293.
  16. A.O. Rashed, A.M.K. Esawi, A.R. Ramadan, Novel polysulfone/carbon nanotube-polyamide thin film nanocomposite membranes with improved water flux for forward osmosis desalination, ACS Omega, 5 (2020) 14427–14436.
  17. E. Igbinigun, Y. Fennell, R. Malaisamy, K.L. Jones, V. Morris, Graphene oxide functionalized polyethersulfone membrane to reduce organic fouling, J. Membr. Sci., 514 (2016) 518–526.
  18. F. Kouhestani, M.A. Torangi, A. Motavalizadehkakhky, R. Karazhyan, R. Zhiani, Enhancement strategy of polyethersulfone (PES) membrane by introducing pluronic F127/graphene oxide and phytic acid/graphene oxide blended additives: preparation, characterization and wastewater filtration assessment, Desal. Water Treat., 171 (2019) 44–56.
  19. R.K. Joshi, S. Alwarappan, M. Yoshimura, V. Sahajwalla, Y. Nishina, Graphene oxide: the new membrane material, Appl. Mater. Today, 1 (2015) 1–12.
  20. H. Ahmad, M. Fan, D. Hui, Graphene oxide incorporated functional materials: a review, Composites, Part B, 145 (2018) 270–280.
  21. S. Xia, M. Ni, Preparation of poly (vinylidene fluoride) membranes with graphene oxide addition for natural organic matter removal, J. Membr. Sci., 473 (2015) 54–62.
  22. R. Li, L. Liu, Y. Zhang, F. Yang, Preparation of a nano-MnO2 surface-modified reduced graphene oxide/PVDF flat sheet membrane for adsorptive removal of aqueous Ni(II), RSC Adv., 6 (2016) 20542–20550.
  23. X.-F. Sun, J. Qin, P.-F. Xia, B.-B. Guo, C.-M. Yang, C. Song, S.-G. Wang, Graphene oxide–silver nanoparticle membrane for biofouling control and water purification, Chem. Eng. J., 281 (2015) 53–59.
  24. A. Gosai, K.R. Khondakar, X. Ma, M.A. Ali, Application of functionalized graphene oxide based biosensors for health monitoring: simple graphene derivatives to 3D printed platforms, Biosensors, 11 (2021) 384–404.
  25. C. Zhang, F. Wang, Z. Jiang, J. Lan, L. Zhao, P. Si, Effect of graphene oxide on the mechanical, tribological, and biological properties of sintered 3Y–ZrO2/GO composite ceramics for dental implants, Ceram. Int., 47 (2021) 6940–6946.
  26. J.M. Luque-Alled, A. Abdel-Karim, M. Alberto, S. Leaper, M. Perez-Page, K. Huang, A. Vijayaraghavan,
    A.S. El-Kalliny, S.M. Holmes, P. Gorgojo, Polyethersulfone membranes: from ultrafiltration to nanofiltration via the incorporation of APTS functionalized-graphene oxide, Sep. Purif. Technol., 230 (2020) 115836, doi:10.1016/j.seppur.2019.115836.
  27. W. Wu, Y. Shi, G. Liu, X. Fan, Y. Yu, Recent development of graphene oxide based forward osmosis membrane for water treatment: a critical review, Desalination, 491 (2020) 114452, doi: 10.1016/j.desal.2020.114452.
  28. X. Tang, W. Li, Z. Yu, Enhanced thermal stability in graphene oxide covalently functionalized with 2-amino-4,6- didodecylamino-1,3,5-triazine, Carbon, 49 (2011) 1258–1265.
  29. A.R. Rico, M. Cucchiarini, PEO-PPO-PEO tri-block copolymers for gene delivery applications in human regenerative medicine—an overview, Int. J. Mol. Sci., 19 (2018) 775, doi: 10.3390/ijms19030775.
  30. M. Ebrahimpour, A.A. Safekordi, S.M. Mousavi, A. Heydarinasab, Modification strategy of biodegradable poly (butylene succinate) (PBS) membrane by introducing Al2O3 nanoparticles: preparation, characterization and wastewater treatment, Desal. Water Treat., 79 (2017) 19–29.
  31. F. Shen, X. Lu, X. Bian, L. Shi, Preparation and hydrophilicity study of poly(vinyl butyral)-based ultrafiltration membranes, J. Membr. Sci., 265 (2005) 74–84.
  32. M. Khayet, T. Matsuura, Determination of surface and bulk pore sizes of flat-sheet and hollow-fiber membranes by atomic force microscopy, gas permeation and solute transport, Desalination, 158 (2003) 57–64.
  33. S.R. Panda, S. De, Effects of polymer molecular weight, concentration, and role of polyethylene glycol as additive on polyacrylonitrile homopolymer membranes, Polym. Eng. Sci., 54 (2014) 2375–2391.
  34. J.H. Li, Y.Y. Xu, L.P. Zhu, J.H. Wang, C.H. Du, Fabrication and characterization of a novel TiO2 nanoparticle
    self-assembly membrane with improved fouling resistance, J. Membr. Sci., 326 (2009) 659–666.
  35. H.T. Dang, R.M. Narbaitz, T. Matsuura, D. Rana, Performance Evaluation of Commercial and Newly-Developed Ultrafiltration Membranes: Surface Analysis and Fouling Tests, American Water Works Association – AWWA Annual Conference and Exposition, ACE, 2007, pp. 602–616.
  36. R.M. Narbaitz, D. Rana, H.T. Dang, J. Morrissette, T. Matsuura, S.Y. Jasim, S. Tabe, P. Yang, Field Testing of Modified CA Membranes to Remove PPCP from Drinking Water, AMTA/ AWWA Membrane Technology Conference and Exposition, 2013, pp. 107–123.
  37. D. Rana, T. Matsuura, State of the art reviews in membrane science and research, J. Membr. Sci. Res., 3 (2017) 118–119.