References

  1. L.E. Peng, Z. Yang, L. Long, S. Zhou, H. Guo, C.Y. Tang, A critical review on porous substrates of TFC polyamide membranes: mechanisms, membrane performances, and future perspectives, J. Membr. Sci., 641 (2022) 119871, doi: 10.1016/j. memsci.2021.119871.
  2. H. Sanaeepur, A.E. Amooghin, M.M.A. Shirazi, M. Pishnamazi, S. Shirazian, Water desalination and ion removal using mixed matrix electrospun nanofibrous membranes: a critical review, Desalination, 521 (2022) 115350, doi: 10.1016/j.desal.2021.115350.
  3. M. Ohno, C. Manalo, L. Rossetto, T. Okuda, S. Nakai, W. Nishijima, Effect of coexisting metal ions on the degradation of polyamide reverse osmosis membrane by hypochlorite treatment, Desalination, 381 (2016) 126–134.
  4. J. Wang, W. Zhao, B. Wang, G. Pei, C. Li, Multilevel-layerstructured polyamide-6/poly(trimethylene terephthalate) nanofibrous membranes for low-pressure air filtration, J. Appl. Polym. Sci., 134 (2017) 44716, doi: 10.1002/app.44716.
  5. L. Ahmadian-Alam, M. Kheirmand, H. Mahdavi, Preparation, characterization and properties of
    PVDF-g-PAMPS/PMMAco-PAMPS/silica nanoparticle as a new proton exchange nanocomposite membrane, Chem. Eng. J., 284 (2016) 1035–1048.
  6. Z. Zhou, S. Rajabzadeh, A.R. Shaikh, Y. Kakihana, T. Ishigami, R. Sano, H. Matsuyama, Preparation and characterization of antifouling poly(vinyl chloride-co-poly(ethylene glycol)methyl ether methacrylate) membranes, J. Membr. Sci., 498 (2016) 414–422.
  7. S. Xu, H. Lin, G. Li, J. Wang, Q. Han, F. Liu, Anionic covalent organic framework as an interlayer to fabricate negatively charged polyamide composite nanofiltration membrane featuring ions sieving, Chem. Eng. J., 427 (2022) 132009, doi: 10.1016/j.cej.2021.132009.
  8. S. Habib, S.T. Weinman, A review on the synthesis of fully aromatic polyamide reverse osmosis membranes, Desalination, 502 (2021) 114939, doi: 10.1016/j.desal.2021.114939.
  9. M.Q. Seah, W.J. Lau, P.S. Goh, H.-H. Seng, R.A. Wahab, A.F. Ismail, Progress of interfacial polymerization techniques for polyamide thin film (nano)composite membrane fabrication: a comprehensive review, Polymers, 12 (2020) 2817, doi: 10.3390/ polym12122817.
  10. M. Dalwani, N.E. Benes, G. Bargeman, D. Stamatialis, M. Wessling, Effect of pH on the performance of polyamide/ polyacrylonitrile based thin-film composite membranes, J. Membr. Sci., 372 (2011) 228–238.
  11. R. Bernstein, S. Belfer, V. Freger, Bacterial attachment to RO membranes surface-modified by concentration-polarizationenhanced graft polymerization, Environ. Sci. Technol., 45 (2011) 5973–5980.
  12. A.K. Holda, B. Aernouts, W. Saeys, I.F.J. Vankelecom, Study of polymer concentration and evaporation time as phase inversion parameters for polysulfone-based SRNF membranes, J. Membr. Sci., 442 (2013) 196–205.
  13. A. Cano-Odena, M. Spilliers, T. Dedroog, K. De Grave, J. Ramon, I.F.J. Vankelecom, Optimization of cellulose acetate nanofiltration membranes for micropollutant removal via genetic algorithms and high throughput experimentation, J. Membr. Sci., 366 (2011) 25–32.
  14. L. Lin, R. Lopez, G.Z. Ramon, O. Coronel, investigating the void structure of the polyamide active layers
    of thin-film composite membranes, J. Membr. Sci., 497 (2016) 365–376.
  15. S. Hermans, R. Bernstein, A. Volodin, I.F.J. Vankelecom, Study of synthesis parameters and active layer morphology of interfacially polymerized polyamide–polysulfone membranes, React. Funct. Polym., 86 (2015) 199–208.
  16. G.Z. Ramon, E.M.V. Hoek, Transport through composite membranes, part 2: impacts of roughness on permeability and fouling, J. Membr. Sci., 425–426 (2013) 141–148.
  17. W.J. Lau, A.F. Ismail, N. Misdan, M.A. Kassim, A recent progress in thin-film composite membrane: a review, Desalination, 287 (2012) 190–199.
  18. P.J. Flory, Principles of Polymer Chemistry, Cornell University Press, Ithaca, NY, 1969.
  19. http://www.kochmembrane.com/Learning-Center/Water-Wastewater, Filtration/
    Characteristics-of-Membrane-Products.aspx
  20. A.K. Ghosh, B.H. Jeong, X. Huang, E.M.V. Hoek, Impacts of reaction and curing conditions on polyamide composite reverse osmosis membrane properties, J. Membr. Sci., 311 (2008) 34–45.
  21. M.N. Mahboub, M. Pakizeha, S. Davari, Preparation and characterization of UZM-5/polyamide thin film nanocomposite membrane for dewaxing solvent recovery, J. Membr. Sci., 459 (2014) 22–32.
  22. J. Zhang, Y. Zhang, H. Zhang, J. Dang, J. Liu, Preparation and characterization of a novel polyamide charged mosaic membrane, Chin. J. Chem. Eng., 18 (2010) 569–576.
  23. A. Alkhudhiri, N. Darwish, N. Hilal, Membrane distillation: a comprehensive review, Desalination, 287 (2012) 2–18.
  24. E. Drioli, L. Giorno, Membrane Operations: Innovative Separations and Transformations, Wiley-VCH, Germany, 2009. Available at: https://onlinelibrary. wiley.com/doi/pdf/10.1002/9783527626779
  25. A. EL-Gendi, Ternary Phase Diagram Construction and Membrane Morphology Evaluation, LAP Lambert Academic Publishing, Germany, ISBN: 978-3-659-57611-9, 2014.
  26. A. EL-Gendi, Phase Diagram and Membrane Desalination, Chapter 3 in Desalination Updates, R.Y. Ning, Ed., Intech Open Limited, London, SW7 2QJ, United Kingdom, 2015. Available at: https://www.intechopen.com/ chapters/48518
  27. A.T. El-Gendi, S.A. Ahmed, H.A. Talaat, Preparation and evaluation of flat membranes for phenols separation, Desalination, 206 (2007) 226–237.
  28. L.A. Nezam El-Din, A. El-Gendi, N. Ismail, K.A. Abed, A.I. Ahmed, Evaluation of cellulose acetate membrane with carbon nanotubes additives, J. Ind. Eng. Chem., 26 (2015) 259–264.
  29. W. Mark, The Guidebook to Membrane Desalination Technology, Balaban Desalination Publications, Italy, 2007. Available at: http://www.desline.com/WilfBookIcomplete. pdf
  30. M. Mulder, Basic Principles of Membrane Technology, 2nd ed., Kluwer Academic, Springer, Dordrecht, Boston, London, ISBN: 0-7923-4248-8, 1996. Available at: file:///C:/Users/ecs/Downloads/ Mulder1996_Book_BasicPrinciplesOfMembraneTechn.pdf
  31. S.L. Duraikkannu, R. Castro-Muñoz, A. Figoli, A review on phase inversion technique-based polymer microsphere fabrication, Colloid Interface Sci. Commun., 40 (2021) 100329, doi: 10.1016/j.colcom.2020.100329.
  32. M.C. Porter, Handbook of Industrial Membrane Technology, Noyes Publications, Park Ridge, New Jersey, U.S.A., 1990, pp. 61–70.
  33. R.W. Baker, Membrane Technology and Applications, 2nd ed., John Wiley & Sons, Ltd., West Sussex PO19 8SQ, England, ISBN: 0-470-85445-6, 2004. Available at: http://aulanni.lecture. ub.ac.id/files/2012/01/MembraneTechnologyApplication1.pdf
  34. Y.-L. Liu, C.-H. Yu, J.-Y. Lai, Poly(tetrafluoroethylene)/polyamide thin-film composite membranes via interfacial polymerization for pervaporation dehydration on an isopropanol aqueous solution, J. Membr. Sci., 315 (2008) 106–115.
  35. https://en.wikipedia.org/wiki/Thin-film_composite_membrane
  36. R. Dai, J. Li, Z. Wang, Constructing interlayer to tailor structure and performance of thin-film composite polyamide membranes: a review, Adv. Colloid Interface Sci., 282 (2020) 102204, doi:10.1016/j.cis.2020.102204.
  37. G.D. Kang, M. Liu, B. Lin, Y.M. Cao, Q. Yuan, A novel method of surface modification on thin-film composite reverse osmosis membrane by grafting poly(ethylene glycol), Polymer, 48 (2007) 1165–1170.
  38. D. Saeki, S. Nagao, I. Sawada, Y. Ohmukai, T. Maruyama, H. Matsuyama, Development of antibacterial polyamide reverse osmosis membrane modified with a covalently immobilized enzyme, J. Membr. Sci., 428 (2013) 403–409.
  39. B. Khorshidi, T. Thundat, B.A. Fleck, M. Sadrzadeh, Thinfilm composite polyamide membranes: parametric study on the influence of synthesis conditions, RSC Adv., 5 (2015) 54985–54997.
  40. D. Rana, T. Matsuura, Surface modifications for antifouling membranes, Chem. Rev., 110 (2010) 2448–2471.
  41. S. Yu, M. Liu, X. Liu, C. Gao, Performance enhancement in interfacially synthesized thin-film composite polyamide– urethane reverse osmosis membrane for seawater desalination, J. Membr. Sci., 342 (2009) 313–320.
  42. M. Fathizadeh, A. Aroujalian, A. Raisi, Effect of lag time in interfacial polymerization on polyamide composite membrane with different hydrophilic sub layers, Desalination, 284 (2012) 32–41.
  43. J. Gilron, S. Belfer, P. Vaisanen, M. Nystrom, Effects of surface modification on antifouling and performance properties of reverse osmosis membranes, Desalination, 140 (2001) 167–179.
  44. M. Liu, S. Yu, J. Tao, C. Gao, Preparation, structure characteristics and separation properties of thin-film composite polyamideurethane seawater reverse osmosis membrane, J. Membr. Sci., 325 (2008) 947–956.
  45. C. Klaysom, S. Hermans, A. Gahlaut, S. Van Craenenbroeck, I.F.J. Vankelecom, Polyamide/polyacrylonitrile (PA/PAN) thin-film composite osmosis membranes: film optimization, characterization and performance evaluation, J. Membr. Sci., 445 (2013) 25–33.
  46. A. Ismail, L. Yean, Review on the development of defectfree and ultrathin-skinned asymmetric membranes for gas separation through manipulation of phase inversion and rheological factors, J. Appl. Polym. Sci., 88 (2003) 442–451.
  47. A. El-Gendi, S.S. Ali, S.A. Ahmed, H.A. Talaat, Development of membrane blend using casting technique for water desalination, Membr. Water Treat., 3 (2012) 185–200.
  48. A. Rawajefa, Polyamide based composite membrane, part 1: preparation and characterization, Desalination, 179 (2005) 265–272.
  49. A.A. Lefebvre, J.H. Lee, N.P. Balsara, B. Hammouda, Fluctuations in highly metastable polymer blends, J. Polym. Sci., Part B: Polym. Phys., 38 (2000) 1926–1930.
  50. A. El-Gendi, A. Amin, H. Abdallah, Mathematical model for polyamide-6/chitosan blend membrane preparation, Res. J. Pharm., Biol. Chem. Sci. RJPBCS, 7 (2016) 892–906.
  51. A. El-Gendi, H. Abdallah, Thermodynamic modeling of polyamide-6 (PA-6)/cellulose acetate (CA) blend membrane prepared via casting technique, J. Polym. Eng., 8 (2013) 701–712.
  52. F. Pacheco, R. Sougrat, M. Reinhard, J.O. Leckie, I. Pinnau, 3D visualization of the internal nanostructure of polyamide thin films in RO membranes, J. Membr. Sci., 501 (2016) 33–44.
  53. D.J. Lin, L.P. Cheng, S.P. Lin, Effect of compatible nucleation seeds on the morphology of porous Nylon-6 membrane, Desalination, 145 (2002) 31–37.
  54. M. Zeni, R. Riveros, J.F. de Souza, K. Mello, C. Meireles, G.R. Filho, Morphologic analysis of porous polyamide 6,6 membranes prepared by phase inversion, Desalination, 221(2008) 294–297.
  55. A.M.W. Bulte, M.H.V. Mulder, C.A. Smolders, H. Strathmann, Induced phase separation with crystallizable nylons. II. Relation to final membrane morphology, J. Membr. Sci., 121 (1996) 51–58.
  56. D.J. Lin, C.L. Chang, C.K. Lee, L.P. Cheng, Fine structure and crystallinity of porous nylon-66 membranes prepared by phase inversion in the water/formic acid/Nylon 66 system, Eur. Polym. J., 42 (2006) 356–367.
  57. A.M.W. Bulte, M.H.V. Mulder, C.A. Smolders, H. Strathmann, Diffusion induced phase separation with crystallizable nylons. I. Mass transfer processes for nylon 4,6, J. Membr. Sci., 121 (1996) 37–49.
  58. J. Yin, G. Zhu, B. Deng, Graphene oxide (GO) enhanced polyamide (PA) thin-film nanocomposite (TFN) membrane for water purification, Desalination, 379 (2016) 93–101.
  59. M. Moslehi, H. Mahdavi, A. Ghaffari, Preparation and characterization of polyamide thin-film composite nanofiltration membrane based on polyurethane nanofibrous support, J. Polym. Environ., 29 (2021) 2463–2477.
  60. A.M. Kadhom, M.H. Al-Furaiji, Z.N. Abudi, Evaluation of thin-film composite forward osmosis membranes: effect of polyamide preparation conditions, Drinking Water Eng. Sci., 14 (2021) 45–52.
  61. A. Rahimpour, M. Jahanshahi, N. Mortazavian, S.S. Madaeni, Y. Mansourpanah, Preparation and characterization of asymmetric polyethersulfone and thin-film composite polyamide nanofiltration membranes for water softening, Appl. Surf. Sci., 256 (2010) 1657–1663.
  62. X. Li, C. Zhang, S. Zhang, J. Li, B. He, Z. Cui, Preparation and characterization of positively charged polyamide composite nanofiltration hollow fiber membrane for lithium and magnesium separation, Desalination, 369 (2015) 26–36.
  63. S.K. Jewrajka, A.V.R. Reddy, H.H. Rana, S. Mandal, S. Khullar, S. Haldar, N. Joshi, P.K. Ghosh, Use of 2,4,6-pyridinetricarboxylic acid chloride as a novel co-monomer for the preparation of thinfilm composite polyamide membrane with improved bacterial resistance, J. Membr. Sci., 439 (2013) 87–95.
  64. A. Linggawati, A.W. Mohammad, C.P. Leo, Effects of APTEOS content and electron beam irradiation on physical and separation properties of hybrid nylon-66 membranes, Mater. Chem. Phys., 133 (2012) 110–117.
  65. A. El-Gendi, S. Ali, H. Abdalla, M. Saied, Microfiltration/ultrafiltration polyamide-6 membranes for copper removal from aqueous solutions, Membr. Water Treat., 7 (2016) 55–70.
  66. H.H. Chang, S.C. Chen, D. Lin, L.-P. Cheng, Preparation of bi-continuous nylon-66 porous membranes by coagulation of incipient dopes in soft non-solvent baths, Desalination, 313 (2013) 77–86.
  67. M. Yanilmaz, M. Dirican, X. Zhang, Evaluation of electrospun SiO2/nylon 6,6 nanofiber membranes as a thermally-stable separator for lithium-ion batteries, Electrochim. Acta, 133 (2014) 501–508.
  68. J.T. Jung, H.H. Wang, J.F. Kim, S.M. Jeon, S.H. Park, W.H. Lee, S.J. Moon, E. Drioli, Y.M. Lee, Microfiber aligned hollow fiber membranes from immiscible polymer solutions by phase inversion, J. Membr. Sci., 617 (2021) 118654, doi: 10.1016/j. memsci.2020.118654.
  69. G.L. Jadav, P.S. Singh, Synthesis of novel silica-polyamide nanocomposite membrane with enhanced properties, J. Membr. Sci., 328 (2009) 257–267.
  70. K. Košutić, L. Kaštelan-Kunst, B. Kunst, Porosity of some commercial reverse osmosis and nanofiltration polyamide thinfilm composite membranes, J. Membr. Sci., 168 (2000) 101–108.
  71. V. Kolev, V. Freger, Hydration, porosity and water dynamics in the polyamide layer of reverse osmosis membranes: a molecular dynamics study, Polymer, 55 (2014) 1420–1426.
  72. O.A. Hommaid, I.M. Al Bakri, Preparation of polyamide-6/zeolite-Y hybrid membranes, and the evaluation of their structural, physical and mechanical properties, Egypt. J. Chem., 63 (2020) 4625–4633.
  73. Q. Zhang, C. Zhang, J. Xu, Y. Nie, S. Li, S. Zhang, Effect of poly(vinyl alcohol) coating process conditions on the properties and performance of polyamide reverse osmosis membranes, Desalination, 379 (2016) 42–52.
  74. Q. Li, H. Yu, F. Wu, J. Song, X. Pan, M. Zhang, Fabrication of semi-aromatic polyamide/spherical mesoporous silica nanocomposite reverse osmosis membrane with superior permeability, Appl. Surf. Sci., 363 (2016) 338–345.
  75. F. Chang, W. Liu, X. Wang, Comparison of polyamide nanofiltration and low-pressure reverse osmosis membranes on As(III) rejection under various operational conditions, Desalination, 334 (2014) 10–16.
  76. T. Wang, L. Dai, Q. Zhang, A. Li, S. Zhang, Effects of acyl chloride monomer functionality on the properties of polyamide reverse osmosis (RO) membrane, J. Membr. Sci., 440 (2013) 48–57.
  77. C.Y. Tang, Y.N. Kwon, J.O. Leckie, Effect of membrane chemistry and coating layer on physiochemical properties of thin-film composite polyamide RO and NF membranes II. Membrane physiochemical properties and their dependence on polyamide and coating layers, Desalination, 242 (2009) 168–182.
  78. M. Nilsson, G. Tragardha K. Ostergren, Influence of temperature and cleaning on aromatic and semi-aromatic polyamide thinfilm composite NF and RO membranes, Sep. Purif. Technol., 62 (2008) 717–726.
  79. A.B. David, S. Bason, J. Jopp, Y. Oren, Partitioning of organic solutes between water and polyamide layer of RO and NF membranes: correlation to rejection, J. Membr. Sci., 281 (2006) 480–490.
  80. C. Mazzoni, S. Bandini, The role of the electrolyte on polyamide NF membranes performances: experimental analysis with NaCl and CaCl2 solutions, Desalination, 200 (2006) 135–137.
  81. C.V. Gherasim, J. Cuhorka, P. Mikulasek, Analysis of lead(II) retention from single salt and binary aqueous solutions by a polyamide nanofiltration membrane: experimental results and modeling, J. Membr. Sci., 436 (2013) 132–144.
  82. A.K. Ghosh, R.C. Bindal, S. Prabhakar, P.K. Tewari, Composite polyamide reverse osmosis (RO) membranes – recent developments and future directions, Mater. Phys., 321 (2011) 43.
  83. J. Hosch, E. Staude, Preparation and investigation of chemically modified porous polyamide ultrafiltration membranes, J. Membr. Sci., 121 (1996) 71–82.
  84. M. Manttari, A. Pihlajamaki, E. Kaipainen, M. Nystrom, Effect of temperature and membrane pre-treatment by pressure on the filtration properties of nanofiltration membranes, Desalination, 145 (2002) 81–86.
  85. R.A. Knight, T. Hazlett, C.C. Gryte, Effect of high temperature annealing on the capillarity of polyamide microporous membranes, Stud. Polym. Sci., 11 (1992) 299–313.
  86. V. Yangali-Quintanilla, A. Verliefde, T.-U. Kim, A. Sadmani, M. Kennedy, G. Amy, Artificial neural network models based on QSAR for predicting rejection of neutral organic compounds by polyamide nanofiltration and reverse osmosis membranes, J. Membr. Sci., 342 (2009) 251–262.
  87. https://www.kochseparation.com/resources/case-studies/
  88. https://www.lenntech.com/products/membrane/romembranes. htm
  89. J.A. Otero, A. Otero-Fernandez, M.D. Fernandez, L. Palacio, P. Pradanos, Use of nanofiltration aromatic polyamide membranes. Case study: influence of operating conditions on the rejection of Pb(II) in aqueous solutions at industrial pilot plant, Procedia Eng., 44 (2012) 2023–2025.
  90. X. Feng, D. Liu, H. Ye, D. Peng, J. Wang, S. Han, Y. Zhang, Highflux polyamide membrane with improved chlorine resistance for efficient dye/salt separation based on a new N-rich amine monomer, Sep. Purif. Technol., 278 (2021) 119533, doi: 10.1016/j. seppur.2021.119533.