References

1. A. Thomas, Essentials of Polymer Flooding Technique, 11 River Street, Hoboken, NJ 07030, USA, 2019, p. 289.
2. M. Muskat, Physical Principles of Oil Production, McGraw‐Hill Book Co., New York City, 1949.
3. W.E. Stiles, Use of permeability distribution in water flood calculations, J. Pet. Technol., 1 (1949) 9–13.
4. J.S. Aronofsky, H.J. Ramey Jr., Mobility ratio ‐ its influence on injection or production histories in five‐spot water flood, J. Pet. Technol., 8 (1956) 205–210.
5. A.B. Dyes, B.H. Caudle, R.A. Erickson, Oil production after breakthrough as influenced by mobility ratio, J. Pet. Technol., 6 (1954) 27–32.
6. K.G. Uranta, S.R. Gomari, P. Russell, F. Hamad, Studying the Effectiveness of Polyacrylamide (PAM) Application in Hydrocarbon Reservoirs at Different Operational Conditions, School of Science, Engineering and Design, Teesside University, Middlesbrough, UK, 2018.
7. W.O. Sohn, B.K. Maitin, V. Hartwlg, Preconditioning concepts in polymer flooding in high salinity reservoirs: laboratory investigations and case histories, SPE Res. Eng., 5 (1990) 503–507.
8. W.N. Diab, E.W. Al-Shalabi, Recent Developments in Polymer Flooding for Carbonate Reservoirs under Harsh Conditions, Paper Presented at the Offshore Technology Conference Brasil, Rio de Janeiro, Brazil, October 2019.
9. E.C. Vermolen, M.J. van Haasterecht, S.K. Masalmeh, M.J. Faber, D.M. Boersma, M. Gruenenfelder, Pushing the Envelope for Polymer Flooding Towards High-Temperature and High- Salinity Reservoirs with Polyacrylamide Based Ter-Polymers, Paper Presented at the SPE Middle East Oil and Gas Show and Conference, Manama, Bahrain, September 2011.
10. U. Alfazazi, W. Al Ameri, M.R. Hashmet, Experimental investigation of polymer flooding with low-salinity preconditioning of high temperature–high-salinity carbonate reservoir, J. Petrol. Explor. Prod. Technol., 9 (2019) 1517–1530.
11. N. Gaillard, B. Giovannetti, T. Leblanc, A. Thomas, O. Braun, C. Favero, Selection of Customized Polymers to Enhance Oil Recovery from High-Temperature Reservoirs, Paper Presented at the SPE Latin American and Caribbean Petroleum Engineering Conference, Quito, Ecuador, November 2015.
12. M.O. Onyekonwu, N.A. Ogolo, Investigating the Use of Nanoparticles in Enhancing Oil Recovery, Paper Presented at the Nigeria Annual International Conference and Exhibition, Tinapa – Calabar, Nigeria, July 2010.
13. P. Druetta, F. Picchioni, Polymer and nanoparticles flooding as a new method for enhanced oil recovery, J. Pet. Sci. Eng., 177 (2019) 479–495.
14. M. Bao, O. Chen, Y. Li, G. Jiang, Biodegradation of partially hydrolyzed polyacrylamide by bacteria isolated from production water after polymer flooding in an oil field, J. Hazard. Mater., 184 (2010) 105–110.
15. B. Xiong, R.D. Loss, D. Shields, T. Pawlik, R. Hochreiter, A.L. Zydney, M. Kumar, Polyacrylamide degradation and its implications in environmental systems, npj Clean Water, 1 (2018) 17, doi: 10.1038/s41545-018-0016-8.
16. Y. Du Regina, Comparative Evaluation of the Performance of Synthetic Polymer and Biopolymer as a Means of Enhanced Oil Recovery Method, Thèse de doctorat: Science appliquée en ingénieurie des systèmes pétroliers, University of Regina, Saskatchewan, 2017.
17. Recommended Practices for Evaluation of Polymers Used in Enhanced Oil Recovery Operations, API Recommended Practices 63 (RP 63), American Petroleum Institute, USA, 1990.
18. T.A. Salih, S.H. Sahi, O.K. Hameed, Rhéological evaluation of polymer (SAV 10) for polymer flooding applications, Iraqi J. Chem. Pet. Eng., 17 (2016) 37–46.
19. L. Rodriguez, S. Antignard, B. Giovannetti, G. Dupuis, N. Gaillard, S. Jouenne, G. Bourdarot, D. Morel, A. Zaitoun, B. Grassl, A New Thermally Stable Synthetic Polymer for Harsh Conditions of Middle East Reservoirs: Part II. NMR and Size Exclusion Chromatography to Assess Chemical and Structural Changes During Thermal Stability Tests, Paper presented at the SPE Improved Oil Recovery Conference, Tulsa, Oklahoma, USA, April 2018.
20. S. Akbari, S. Mohammad Mahmood, I.M. Tan, H. Ghaedi, O.L. Ling, Assessment of polyacrylamide based
    co-polymers enhanced by functional group modifications with regards to salinity and hardness, Polymers, 9 (2017) 647, doi: 10.3390/polym9120647.
21. J.J. Sheng, Modern Chemical Enhanced Oil Recovery: Theory and Practice, Gulf Professional Publishing, Elsevier’s Global Advanced Technology Hub, London, 2010. doi: 10.1016/C2009-0-20241-8
22. H. Yousefvand, A. Jafari, Enhanced oil recovery using polymer/nanosilica, Procedia Mater. Sci., 11 (2015) 565–570.
23. M. Zeyghami, R. Kharrat, M.H. Ghazanfari, Investigation of the applicability of nano-silica particles as a thickening additive for polymer solutions applied in EOR processes, Energy Sources, Part A, 36 (2014) 1315–1324.
24. M. Kawaguchi, Rheological properties of silica suspensions in polymer solutions, Adv. Colloid Interface Sci., 53 (1994) 103–127.
25. Y. Samoshina, A. Diaz, Y. Becker, T. Nylander, B. Lindman, Adsorption of cationic, anionic and hydrophobically modified polyacrylamides on silica surfaces, Colloids Surf., A, 231 (2003) 195–205.