References

1. X. Wang, X. Sun, H. Jiang, H. Zhao, Sh. Li, Problems existing in the operation of horizontal flow sedimentation tank and their improving measures, China Water Wastewater, 22 (2006) 27–30 (in Chinese).
2. Ch. Yan, D. Zhang, P. Lu, Zh. Li, The study and prospect of the secondary clarifier models in wastewater treatment, J. Chongqing Univ., 27 (2004) 130–133 (in Chinese).
3. S. Arendze, M.S. Sibiya, Comparing the flow dynamics and particle settling in full scale sedimentation tanks of different lengths, Water Sci. Technol. Water Supply, 17 (2016) 998–1006.
4. R. Tarpagkou, A. Pantokratoras, CFD methodology for sedimentation tanks: the effect of secondary phase on fluid phase using DPM coupled calculations, Appl. Math. Modell., 37 (2013) 3478–3494.
5. W. Zhang, Z. Zou, J. Sui, Numerical simulation of a horizontal sedimentation tank considering sludge recirculation, J. Environ. Sci., 22 (2010) 1534–1538.
6. R. Tarpagkou, A. Pantokratoras, The influence of lamellar settler in sedimentation tanks for potable water treatment—a computational fluid dynamic study, Powder Technol., 268 (2014) 139–149.
7. H. Gao, M.K. Stenstrom, Evaluation of three turbulence models in predicting the steady state hydrodynamics of a secondary sedimentation tank, Water Res., 143 (2018) 445–456.
8. M. Shahrokhi, F. Rostami, M.A. Md Said, S.R. Sabbagh Yazdi, Syafalni, The effect of number of baffles on the improvement efficiency of primary sedimentation tanks, Appl. Math. Modell., 36 (2012) 3725–3735.
9. M. Shahrokhi, F. Rostami, M.A. Md Said, Syafalni, Numerical modeling of baffle location effects on the flow pattern of primary sedimentation tanks, Appl. Math. Modell., 37 (2013) 4486–4496.
10. W. Wei, Z. Zhang, Ch. Bai, Y. Liu, Numerical simulation of a feed flow baffle on the flow of a radial sedimentation tank by using a liquid-solid two-phase model, Chin. J. Appl. Mech., 33 (2016) 93–98+183 (in Chinese).
11. F. Rostami, M. Shahrokhi, M.A. Md Said, R. Abdullah, Syafalni, Numerical modeling on inlet aperture effects on flow pattern in primary settling tanks, Appl. Math. Modell., 35 (2011) 3012–3020.
12. H. Asgharzadeh, B. Firoozabadi, H. Afshin, Experimental investigation of effects of baffle configurations on the performance of a secondary sedimentation tank, Sci. Iran., 18 (2011) 938–949.
13. J. Liu, Effect of inlet-velocity on water flow distribution in horizontal flow settling tank, Eng. Constr., 49 (2017) 60–62+66 (in Chinese).
14. M. Patziger, H. Kainz, M. Hunze, J. Józsa, Influence of secondary settling tank performance on suspended solids mass balance in activated sludge systems, Water Res., 46 (2012) 2415–2424.
15. P. Rodríguez López, A.G. Lavín, M.M. Mahamud López, J.L. Bueno de las Heras, Flow models for rectangular sedimentation tanks, Chem. Eng. Process. Process Intensif., 47 (2008) 1705–1716.
16. S.A. Orszag, I. Staroselsky, W.S. Flannery, Y. Zhang, Chapter 4 – Simulation and Modeling of Turbulent Flows, Introduction to Renormalization Group Modeling of Turbulence, Oxford Univ. Press Inc., New York, NY, USA, 1996.
17. T.-H. Shih, W.W. Liou, A. Shabbir, Z. Yang, J. Zhu, A new k–ε eddy viscosity model for high Reynolds number turbulent flows, Comput. Fluids, 24 (1995) 227–238.
18. B.E. Launder, D.B. Spalding, The numerical computation of turbulent flows, Comput. Methods Appl. Mech. Eng., 3 (1974) 269–289.
19. W. Wei, C. Lou, Y. He, J. Wei, Y. Cai, Y. Chang, Computational fluid dynamics for the influence of a semi-circular guiding wall on the hydraulic characteristics in an oxidation ditch, Desal. Water Treat., 196 (2020) 93–101.
20. W. Wei, Y. Liu, B. Lv, Numerical simulation of optimal submergence depth of impellers in an oxidation ditch, Desal. Water Treat., 57 (2015) 8228–8235.
21. W.L. Wei, H.C. Dai, Turbulence Model Theory and Engineering Applications, 1st ed., Shanxi Sci. Tech. Press, Xi’an City, 2006 (in Chinese).
22. C. Hirt, B. Nicholas, Volume of fluid (VOF) method for the dynamics of free boundaries, J. Comput. Phys., 39 (1981) 201–225.