References

1. D. Pernitsky, J. Edzwald, Practical paper. Selection of alum and polyaluminum coagulants: principles and applications, J. Water Supply Res. Technol. AQUA, 55 (2006) 121–141.
2. Y. Wang, B. Gao, X. Xu, W. Xu, G. Xu, Characterization of floc size, strength and structure in various aluminum coagulants treatment, J. Colloid Interface Sci., 332 (2009) 354–359.
3. Z. Chen, Z. Luan, Z. Jia, X. Li, Study on the hydrolysis precipitation behavior of Keggin Al13 and Al30 polymers in polyaluminum solutions, J. Environ. Manage., 90 (2009) 2831–2840.
4. D. Pernitsky, J. Edzwald, Solubility of polyaluminum coagulants, J. Water Supply Res. Technol. AQUA, 52 (2003) 395–406.
5. J. Van Benschoten, J. Edzwald, Chemical aspects of coagulation using aluminum salts—I. Hydrolytic reactions of alum and polyaluminum chloride, Water Res., 12 (1990) 1519–1526.
6. M. Yan, D. Wang, J. Ni, J. Qu, Ch. Chow, H. Liu, Mechanism of natural organic matter removal by polyaluminum chloride: effect of coagulant particle size and hydrolysis kinetics, Water Res., 42 (2008) 3361–3370.
7. M. Yan, D. Wang, J. Qu, W. He, Ch. Chow, Relative importance of hydrolyzed Al(III) specie during coagulation with polyaluminum chloride: a case study with the typical micropolluted source waters, J. Colloid Interface Sci., 316 (2007) 482–489.
8. M. Yan, D. Wang, J. Yu, J. Ni, M. Edwards, J. Qu, Enhanced coagulation with polyaluminum chlorides: Role of pH, alkalinity and speciation, Chemosphere, 71 (2008) 1665–1673.
9. W. Xu, B. Gao, Q. Yue, Q. Wang, Effect of preformed and non-preformed Al13 species on evolution of floc size, strength and fractal nature of humic acid flocs in coagulation process, Sep. Purif. Technol., 78 (2011) 83–90.
10. B. Zhao, D. Wang, T. Li, Ch. Chow, Ch. Huang, Influence of floc structure on coagulation–microfiltration performance: effect of Al speciation characteristics of PACls, Sep. Purif. Technol., 72 (2010) 22–27.
11. P. Jarvis, B. Jefferson, J. Gregory, S. Parsons, A review of floc strength and breakage, Water Res., 39 (2005) 3121–3137.
12. M. Solomentseva, S. Barany, J. Gregory, Surface properties and aggregation of basic aluminum sulphate hydrolysis products: 1. Electrokinetic potential and hydration of BAS hydrolysis product particles, Colloids Surf., A, 230 (2004) 117–129.
13. M. Kłos, J. Gumińska, Research on determining the degree of polymerization of pre-hydrolyzed aluminum coagulants, Environ. Prot., 29 (2007) 27—31.
14. W. Zhou, B. Gao, Q. Yue, L. Liu, Y. Wang, Al-Ferron kinetics and quantitative calculations of Al(III) species in polyaluminum chloride coagulants, Colloids Surf., A, 278 (2006) 235–240.
15. K. McCurdy, K. Carlson, D. Gregory, Floc morphology and cyclic shearing recovery: comparison of alum and polyaluminum chloride coagulants, Water Res., 38 (2004) 486–494.