References

1. Qianxun Industry Research, China Submersible Pump Industry Research Report, Qianxun Consuling Industry Research Center, Beijing, 2013.
2. L. Zhang, Development of the submersible motor technology, PET Mach., 22 (1994) 48–49.
3. L.H. Mo, X.Y. Zhu, T. Zhang, L. Quan, Y.Q. Wang, J. Huang, Temperature rise calculation of a flux-switching permanentmagnet double-rotor machine using electromagnetic-thermal coupling analysis, IEEE Trans. Magn., 54 (2018) 8201004, doi: 10.1109/TMAG.2017.2764182.
4. Y.M. Xu, M.M. Ai, Y. Yang, Heat transfer characteristic research based on thermal network method in submersible motor, Int. Trans. Electr. Energy Syst., 28 (2018) e2507, doi: 10.1002/etep.2507.
5. S.Y. Ding, G.H. Cui, Z.Y. Li, T.Y. Guan, Fluid and thermal performance analysis of PMSM used for driving, Heat Mass Transfer, 52 (2016) 571–579.
6. K. Zhao, J. Luo, Performance comparison and analysis of different rotor structures of vehicle permanent magnet synchronous flat wire motor, Machines, 10 (2022) 212, doi: 10.3390/machines10030212.
7. Q. Zhang, Z.-l. Li, X.-w. Dong, Y.-x. Liu, R. Yu, Comparative analysis of temperature field model and design of cooling system structure parameters of submersible motor, J. Therm. Sci. Eng. Appl., 13 (2021) 051002 (16 p.), doi: 10.1115/1.4049754.
8. X.W. Zheng, Y.F. Wang, M. Jiang, S.B. Zhang, Numerical simulation of interior turbulent flow regulation of wet submersible motor, Wireless Pers. Commun., 102 (2018) 1443–1459.
9. B.K. Guan, C. Di, Z. Ke, X.H. Bao, A numerical model for single-point bearing faults analysis in submersible induction motors, IEEJ Trans. Electr. Electron. Eng., 17 (2022) 1811–1819.
10. Y.M. Xu, D.W. Meng, J. Tan, Research on design key technologies for high-power submersible motor, Adv. Mater. Res., 383–390 (2011) 414–419.
11. D.G. Dorrell, Combined thermal and electromagnetic analysis of permanent-magnet and induction machines to aid calculation, IEEE Trans. Ind. Electron., 55 (2008) 3566–3582.
12. A. Boglietti, A. Cavagnino, D. Staton, M. Shanel, M. Mueller, C. Mejuto, Evolution and modern approaches for thermal analysis of electrical machines, IEEE Trans. Ind. Electron., 56 (2009) 871–882.
13. Y.Q. Wang, J. He, L. Ma, L. Wang, Y.Y. Sun, T. Wan, J.F. Dang, Research of the temperature field distribution based on FVM for oil-immersed transformer, Adv. Mater. Res., 1079–1080 (2014) 510–514.
14. M.M. Ai, Y. Shan, The whole field temperature rise calculation of oil-immersed power transformer based on thermal network method, Int. J. Appl. Electromagn. Mech., 70 (2022) 55–72.
15. J. Wang, L.H. Chen, Z.Y. Yu, Z.C. Wang, Y. Li, Design and analysis of a new cooling structure for interior permanent magnet synchronous motor with built-in fan, J. Phys. Conf. Ser., 2218 (2022) 012055, doi: 10.1088/1742-6596/2218/1/012055.
16. N.Q. Shi, M. Wei, L.X. Zhang, X. Hu, B. Song, Design and research of cooling system for 2.5 MW permanent magnet wind turbine, Renewable Energy, 168 (2020) 97–106.
17. S.X. Chen, S.Y. Ding, S.F. Shen, Y. Dai, Z. Yang, Analysis and suppression of electromagnetic vibrations in surfacemounted permanent magnet synchronous motors for ships, J. Electrical Eng. Technol., 38 (2023) 1275–1286+1298.
18. M. Königs, H. Baccouche, S. Breser, T. Jöns, B. Löhlein, Simulation time reduction with 2.5D FEM analysis for axial flux machines, Power Electron. Drives, 8 (2023) 100–108.