References

1. S. Santoyo, J. Siqueiros, C. L. Heard, E. Santoyo and F.A. Holland, An experimental integrated absorption heat pump effluent purification system, Part I: Operating on water/lithium bromide solutions, Appl. Therm. Eng., 19 (1999) 461–475.
2. R.F. Escobar, D. Juárez, J. Siqueiros, C. Irles and J.A. Hernández, On-line COP estimation for waste energy recovery heat transformer by water purification process, Desalination, 222 (2008) 677–683.
3. S. Santoyo, J. Siqueiros, C.L. Heard, E. Santoyo and F.A. Holland, An experimental integrated absorption heat pump effluent purification system, Part II: Operating on water/carrol solutions, Appl. Therm. Eng., 20 (2000) 269–284.
4. J. Torres-Merino, Contacteurs gaz-liquide pour pompes à chaleur à absorption multi-étagées, PhD Thesis, Institut National Polytechnique de Lorraine, France; 1997.
5. F.A. Holland, J. Siqueiros, S. Santoyo, C.L. Heard and E.R. Santoyo, Water Purification Using Heat Pumps, E&FN Spon/Routledge, London and New York, 1999.
6. A. Şencana, Ö. Kýzýlkana, N.Ç. Bezirb and S.A. Kalogirou, Different methods for modeling absorption heat transformer powered by solar pond. Energy Conv. Manage., 48(3) (2007) 724– 735.
7. D. Colorado-Garrido, E. Santoyo-Castelazo, J.A. Hernandez, O. Garcia-Valladares, D. Juarez-Romero and J. Siqueiros, Numerical simulation for the heat transfer of a helical double-pipe vertical evaporator, Proc., European Congress of Chemical Engineering (ECCE-6), 2007, pp. 16–20.
8. O. García-Valladares, Simulación numérica y validación experimental de evaporadores, condensadores y tubos capilares. Integración a sistemas de refrigeración por compresión, PhD Thesis, Universidad Politécnica de Cataluña, Terrassa, España, 2000.
9. O. García-Valladares, C.D. Pérez-Segarra and J. Rigola, Numerical simulation of double pipe condensers and evaporators, Int. J. Refrig., 27 (2004) 656–670.
10. NIST Standard Reference Database 10, NIST/ASME Steam properties Database, Version 2.11, USA; 2007.
11. O. García-Valladares, Numerical simulation and experimental validation of coiled adiabatic capillary tubes, Appl. Therm. Eng., 27 (2007) 1062–1071.
12. L. Guo, Z. Feng and X. Chen, An experimental investigation of the frictional pressure drop of steam-water two-phase flow in helical coils, Int. J. Heat Mass. Tran., 44 (2001) 2601–2610.
13. T.H. Ko, Thermodynamic analysis of optimal curvature ratio for fully developed laminar forced convection in a helical coiled tube with uniform heat flux, Int. J. Term. Sci., 45 (2006) 729–737.
14. L. Zhao, L. Gou, B. Bai, Y. Hou and X. Zhang, Convective boiling heat transfer and two-phase flow characteristics inside a small horizontal helically coiled tubing once-through steam generator. Int. J. Heat Mass. Tran., 46 (2003) 4779–4788.
15. Z. Rouhani and E. Axelsson, Calculation of volumen void fraction in the sub-cooled and quality region,
    Int. J. Heat Mass Tran., 13 (1970) 383–393.
16. L. Friedel, Improved friction pressure drop correlation for horizontal and vertical two-phase pipe flow. European Two- Phase Flow Group Meeting, Paper E2, Ispra, Italy, 1979.
17. J.A. Hernández, D. Juárez-Romero, L.I. Morales and J. Siqueiros, COP prediction for the integration of a water purification process in a heat transformer: with and without energy recycling, Desalination, 219 (2008) 66–80.
18. D. Colorado-Garrido, E. Santoyo-Castelazo, J.A. Hernández, O. García-Valladares, J. Siqueiros and
    D. Juárez-Romero, Heat transfer of a helical double-pipe vertical evaporator: Theoretical analysis and experimental validation, Appl. Energy, in press.