References

  1. G. Munz, R. Gori, L. Cammilli, C. Lubello, Characterization of tannery wastewater and biomass in a membrane bioreactor using respirometric analysis, Bioresour. Technol., 99 (2008) 8612–8618.
  2. A.R. Pendashteh, C.A. Luqman, A. Fakhru’l-Razia, S.S. Madaeni, Z.A. Zainal, A.B.R. Dayang Radiah, Evaluation of membrane bioreactor for hypersaline oily wastewater treatment, Process Saf. Environ. Prot., 90 (2012) 45–55.
  3. L. De Temmerman, T. Maere, H. Temmink, A. Zwijnenburg, I. Nopens, Salt stress in a membrane bioreactor: dynamics of sludge properties, membrane fouling and remediation through powdered activated carbon dosing, Water Res., 63 (2014) 112–124.
  4. C. Sun, T. Leiknes, J. Weitzenbock, B. Thorstensen, Development of a biofilm-MBR for shipboard wastewater treatment: the effect of process configuration, Desalination, 250 (2010) 745–750.
  5. MARPOL 73/78 International Maritime Organization’s regulation Prevention of Air Pollution from Ships, IMO MARPOL 73/76, London, United Kingdom, 1997.
  6. G. Li, S.H. Guo, F.M. Li, Treatment of oilfield produced water by anaerobic process coupled with micro-electrolysis, J. Environ. Sci., 22 (2010) 1875–1882.
  7. O. Lefebvre, R. Moletta, Treatment of organic pollution in industrial saline wastewater: a literature review, Water Res., 40 (2006) 3671–3682.
  8. D. Di Trapani, G. Di Bella, G. Mannina, M. Torregrossa, G. Viviani, Comparison between moving bed-membrane bioreactor (MB-MBR) and membrane bioreactor (MBR) systems: influence of wastewater salinity variation, Bioresour. Technol., 162 (2014) 60–69.
  9. S. Soltani, D. Mowla, M. Vossoughi, M. Hesampour, Experimental investigation of oily water treatment by membrane bioreactor, Desalination, 250 (2010) 598–600.
  10. W. Guo, H.H. Ngo, J. Li, A mini-review on membrane fouling, Bioresour. Technol., 122 (2012) 27–34.
  11. W.J. Gao, M.N. Han, X. Qu, C. Xu, B.Q. Liao, Characteristics of wastewater and mixed liquor and their role in membrane fouling, Bioresour. Technol., 128 (2013) 207–214.
  12. D. Jang, Y. Hwang, H. Shin, W. Lee, Effects of salinity on the characteristics of biomass and membrane fouling in membrane bioreactors, Bioresour. Technol., 141 (2013) 50–56.
  13. W.C.L. Lay, Y. Liu, A.G. Fane, Impacts of salinity on the performance of high retention membrane bioreactors for water reclamation: a review, Water Res., 44 (2010) 21–40.
  14. G. Di Bella, N. Di Prima, D. Di Trapani, G. Freni, M.G. Giustra, M. Torregrossa, G. Viviani, Performance of membrane bioreactor (MBR) systems for the treatment of shipboard slops: assessment of hydrocarbon biodegradation and biomass activity under salinity variation, J. Hazard. Mater., 300 (2015) 765–778.
  15. E. Reid, X. Liu, S.J. Judd, Effect of high salinity on activated sludge characteristics and membrane permeability in an immersed membrane bioreactor, J. Membr. Sci., 283 (2006) 164–171.
  16. G. Mannina, A. Cosenza, D. Di Trapani, M. Capodici, G. Viviani, Membrane bioreactors for treatment of saline wastewater contaminated by hydrocarbons (diesel fuel): an experimental pilot plant case study, Chem. Eng. J., 291 (2016) 269–278.
  17. G. Mannina, G. Di Bella, Comparing two start-up strategies for MBRs: experimental study and mathematical modeling, Biochem. Eng. J., 68 (2012) 91–103.
  18. APHA, Standard Methods for the Examination of Water and Wastewater, APHA, AWWA and WPCF, Washington, DC, USA, 2005.
  19. H. Spanjers, P.A. Vanrolleghem, G. Olsson, P. Dold, Respirometry in control of the activated sludge process, Water Sci. Technol., (1996) 34 117–126.
  20. P.A. Vanrolleghem, H. Spanjers, B. Petersen, P. Ginestet, I. Takacs, Estimating (combination of) activated sludge model No.1 parameters and component by respirometry, Water Sci. Technol., 39 (1999) 195–214.
  21. A. Ramdani, P. Dold, S. Déléris, D. Lamarre, A. Gadbois, Y. Comeau, Biodegradation of the endogenous residue of activated sludge, Water Res., 44 (2010) 2179–2188.
  22. X.Q. Zhang, P.L. Bishop, B.K. Kinkle, Comparison of extraction methods for quantifying extracellular polymers in biofilms, Water Sci. Technol., 39 (1999) 211–218.
  23. A. Cosenza, G. Di Bella, G. Mannina, M. Torregrossa, The role of EPS in fouling and foaming phenomena for a membrane bioreactor, Bioresour. Technol., 147 (2013) 184–192.
  24. O.H. Lowry, N.J. Rosebrough, A.L. Farr, R.J. Randall, Protein measurement with the Folin phenol reagent, J. Biol. Chem., 193 (1951) 265–275.
  25. M. DuBois, K.A. Gilles, J.K. Hamilton, P.A. Rebers, F. Smith, Colorimetric method for determination of sugars and related substances, Anal. Chem., 28 (1956) 350–356.
  26. A. Drews, J. Mante, V. Iversen, M. Vocks, B. Lesjean, M. Kraume, Impact of ambient conditions on SMP elimination and rejection in MBRs, Water Res., 41 (2007) 3850–3858.
  27. I.-S. Chang, S.-O. Bag, C.-H. Lee, Effects of membrane fouling on solute rejection during membrane filtration of activated sludge, Process. Biochem., 36 (2001) 855–860.
  28. F. Meng, H.M. Zhang, Y.S. Li, X.W. Zhang, F.L. Yang, J.N. Xiao, Cake layer morphology in microfiltration of activated sludge wastewater based on fractal analysis, Sep. Purif. Technol., 44 (2005) 250–257.
  29. F. Meng, F. Yang, Fouling mechanisms of deflocculated sludge, normal sludge, and bulking sludge in membrane bioreactor, J. Membr. Sci., 305 (2007) 48–56.
  30. W. Zhiwei, W. Zhichao, T. Shujuan, Extracellular polymeric substances (EPS) properties and their effects on membrane fouling in a submerged membrane bioreactor, Water Res., 43 (2009) 2504–2512.
  31. D. Jenkins, M.G. Richard, G.T. Daigger, Manual on the Causes and Control of Activated Sludge Bulking, Foaming and Other Solids Separation Problems, IWA Publishing, London, 2003.
  32. W. Luo, H.V. Phan, F.I. Hai, W.E. Price, W. Guo, H.H. Ngo, L.D. Nghiem, Effects of salinity build-up on the performance and bacterial community structure of a membrane bioreactor, Bioresour. Technol., 200 (2016) 305–310.
  33. M.A.H. Johir, S. Vigneswaran, J. Kandasamy, R. BenAim, A. Grasmick, Effect of salt concentration on membrane bioreactor (MBR) performances: detailed organic characterization, Desalination, 322 (2013) 13–20.
  34. K.N. Yogalakshmi, K. Joseph, Effect of transient sodium chloride shock loads on the performance of submerged membrane bioreactor, Bioresour. Technol., 101 (2010) 7054–7061.
  35. G. Mannina, M. Capodici, A. Cosenza, D. Di Trapani, G. Viviani, Sequential batch membrane bio-reactor for wastewater treatment: the effect of increased salinity, Bioresour. Technol., 209 (2016) 205–212.
  36. Ö. Karahan-Gül, N. Artan, D. Orhon, M. Henze, M.C.M van Loosdrecht, Respirometric assessment of storage yield for different substrates, Water Sci. Technol., 46 (2002) 345–352.
  37. W. Luo, F.I. Hai, J. Kang, W.E. Price, W. Guo, H.H. Ngo, L.D. Nghiem, Effects of salinity build-up on biomass characteristics and trace organic chemical removal: Implications on the development of high retention membrane bioreactors, Bioresour. Technol., 177 (2015) 274–281.