References

  1. Y. Liu, G.H. Koops, H. Strathmann, Characterization of morphology controlled polyethersulfone hollow fiber membrane by the addition of polyethylene glycol to the dope and bore liquid solution, J. Membr. Sci., 223 (2003) 187–199.
  2. B. Chakrabarty, A.K. Ghoshal, M.K. Purkait, Effect of molecular weight of PEG on membrane morphology and transport properties, J. Membr. Sci., 309 (2008) 209–221.
  3. J.H. Kim, K.H. Lee, Effect of PEG additive on membrane formation by phase inversion, J. Membr. Sci., 138 (1998) 153–163.
  4. J.F. Li, Z.L. Xu, H. Yang, Microporous polyethersulfone membranes prepared under the combined precipitation conditions with non-solvent additives, Polym. Adv. Technol., 19 (2008) 251–257.
  5. S.J. Shin, J.P. Kim, H.J. Kim, J.H. Jeon, B.R. Min, Preparation and characterization of polyethersulfone microfiltration membranes by a 2-methoxyethanol additive, Desalination, 186 (2005) 1–10.
  6. H. Susanto, M. Ulbricht, Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives, J. Membr. Sci., 327 (2009) 125–135.
  7. W. Zhao, Y.L. Su, C. Li, Q. Shi, X. Ning, Z.Y. Jiang, Fabrication of anti-fouling polyethersulfone ultrafiltration membranes using Pluronic F127 as both surface modifier and pore-forming agent, J. Membr. Sci., 318 (2008) 405–412.
  8. Y.Q. Wang, T. Wang, Y.L. Su, F. Peng, H. Wu, Z.Y. Jiang, Remarkable reduction of irreversible fouling and improvement of the permeation properties of poly(ethersulfone) ultrafiltration membranes by blending with Pluronic F127, Langmuir, 21 (2005) 11856–11862.
  9. G. Khang, H.B. Lee, J.B. Park, Biocompatibility of polysulfone I surface modifications and characterizations, Bio Med. Mater. Eng., 5 (1995) 245–158.
  10. J.Y. Ho, T. Matsuura, J.P. Santerre, The effect of fluorinated surface modifying macromolecules on the surface morphology of polyethersulfone membranes, J. Biomater. Sci. Polym. Ed., 11 (2000) 1085–1104.
  11. K.S. Kim, K.H. Lee, K. Cho, C.E. Park, Surface modification of polysulfone ultrafiltration membrane by oxygen plasma treatment, J. Membr. Sci., 199 (2002) 135–145.
  12. J.-J. Qin, F.S. Wong, Y. Li, Y.T. Liu, A high flux ultrafiltration membrane spun from PSU/PVP(K90)/DMF/1,2-propanediol, J. Membr. Sci., 211 (2003) 139–147.
  13. I.M. Wienk, R.M. Boom, M.A.M. Beerlage, A.M.W. Bulte, C.A. Smolders, H. Strathmann, Recent advances in the formation of phase inversion membranes made from amorphous or semi-crystalline polymers, J. Membr. Sci., 113 (1996) 361–371.
  14. J.-J. Qin, M.-H. Oo, Y. Li, Development of high flux polyethersulfone hollow fiber ultrafiltration membranes from a low critical solution temperature dope via hypochlorite treatment, J. Membr. Sci., 247 (2005) 137–142.
  15. I.M. Wienk, E.E.B. Meuleman, Z. Borneman, Th. Van den Boomgaard, C.A. Smolders, Chemical treatment of membranes of a polymer blend: mechanism of the reaction of hypochlorite with poly(vinyl pyrrolidone), J. Polym. Sci. Part A: Polym. Chem., 33 (1995) 49–54.
  16. H. Ohya, S. Shiki, H. Kawakami, Fabrication study of polysulfone hollow-fiber microfiltration membranes: optimal dope viscosity for nucleation and growth, J. Membr. Sci., 326 (2009) 293–302.
  17. M. Mansourizadeh, A.F. Ismail, Effect of additives on the structure and performance of polysulfone hollow fiber membranes for CO2 absorption, J. Membr. Sci., 348 (2010) 260–267.
  18. R. Mahendran, R. Malaisamy, D.R. Mohan, Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: preparation and characterizations, Polym. Adv. Technol., 15 (2004) 149–157.