References

  1. M.T. Yagub, T.K. Sen, S. Afroze, H.M. Ang, Dye and its removal from aqueous solution by adsorption: a review, Adv. Colloid Interface Sci., 209 (2014) 172–184.
  2. P. Sharma, H. Kaur, M. Sharma, V. Sahore, A review on applicability of naturally available adsorbents for the removal of hazardous dyes from aqueous waste, Environ. Monit. Assess., 183 (2011) 151–195.
  3. C. Smaranda, M. Gavrilescu, D. Bulgariu, Studies on sorption of congo red from aqueous solution onto soil, Int. J. Environ. Res., 5 (2011) 177–188.
  4. J.A. Ippolito, K.A. Barbarick, H.A. Elliott, Drinking water treatment residuals: a review of recent uses, J. Environ. Qual., 40 (2011) 1–12.
  5. A.O. Babatunde, Y.Q. Zhao, Constructive approaches toward water treatment works sludge management: an international review of beneficial reuses, Crit. Rev. Environ. Sci. Technol., 37 (2007) 129–164.
  6. L.L. Bai, C.H. Wang, Y.S. Pei, J.B. Zhao, Reuse of drinking water treatment residuals in a continuous stirred tank reactor for phosphate removal from urban wastewater, Environ. Technol., 35 (2014) 2752–2759.
  7. S. Vinitnantharat, S. Kositchaiyong, S. Chiarakorn, Removal of fluoride in aqueous solution by adsorption on acid activated water treatment sludge, Appl. Surf. Sci., 256 (2010) 5458–5462.
  8. K.C. Makris, D. Sarkar, R. Datta, Aluminum-based drinking-water treatment residuals: a novel sorbent for perchlorate removal, Environ. Pollut., 140 (2006) 9–12.
  9. P. Castaldi, E. Mele, M. Silvetti, G. Garau, S. Deiana, Water treatment residues as accumulators of oxoanions in soil. Sorption of arsenate and phosphate anions from an aqueous solution, J. Hazard. Mater., 264 (2014) 144–152.
  10. K.B. Dassanayake, G.Y. Jayasinghe, A. Surapaneni, C. Hetherington, A review on alum sludge reuse with special reference to agricultural applications and future challenges, Waste Manage., 38 (2015) 321–335.
  11. C.H. Wang, S.J. Gao, T.X. Wang, B.H. Tian, Y.S. Pei, Effectiveness of sequential thermal and acid activation on phosphorus removal by ferric and alum water treatment residuals, Chem. Eng. J., 172 (2011) 885–891.
  12. C.H. Wang, H.L. Jiang, N.N. Yuan, Y.S. Pei, Z.S. Yan, Tuning the adsorptive properties of drinking water treatment residue via oxygen-limited heat treatment for environmental recycle, Chem. Eng. J., 284 (2016) 571–581.
  13. W. Chu, Dye removal from textile dye wastewater using recycled alum sludge, Water Res., 35 (2001) 3147–3152.
  14. M. Toor, B. Jin, Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dye, Chem. Eng. J., 187 (2012) 79–88.
  15. Y.Z. Li, C.J. Liu, Z.K. Luan, X.J. Peng, C.L. Zhu, Z.Y. Chen, Z.G. Zhang, J.H. Fan, Z.P. Jia, Phosphate removal from aqueous solutions using raw and activated red mud and fly ash, J. Hazard. Mater., 137 (2006) 374–383.
  16. Y. Sarikaya, I. Sevinc, M. Akinc, The effect of calcination temperature on some of the adsorptive properties of fine alumina powders obtained by emulsion evaporation technique, Powder Technol., 116 (2001) 109–114.
  17. Y.F. Zhou, R.J. Haynes, Removal of Pb(II), Cr(III) and Cr(VI) from aqueous solutions using alum-derived water treatment sludge, Water Air Soil Pollut., 215 (2011) 631–643.
  18. J.A. Ippolito, K.G. Scheckel, K.A. Barbarick, Selenium adsorption to aluminum-based water treatment residuals, J. Colloid Interface Sci., 338 (2009) 48–55.
  19. N.H. Rodriguez, S.M. Ramirez, M.T.B. Varela, M. Guillem, J. Puig, E. Larrotcha, J. Flores, Re-use of drinking water treatment plant (DWTP) sludge: characterization and technological behaviour of cement mortars with atomized sludge additions, Cem. Concr. Res., 40 (2010) 778–786.
  20. R.A.V. Rossel, T. Behrens, Using data mining to model and interpret soil diffuse reflectance spectra, Geoderma, 158 (2010) 46–54.
  21. P. Castaldi, M. Silvetti, G. Garau, D. Demurtas, S. Deiana, Copper(II) and lead(II) removal from aqueous solution by water treatment residues, J. Hazard. Mater., 283 (2015) 140–147.
  22. J. Madejova, FTIR techniques in clay mineral studies, Vib. Spectrosc., 31 (2003) 1–10.
  23. K.C. Makris, W.G. Harris, Time dependency and irreversibility of water desorption by drinking-water treatment residuals: implications for sorption mechanisms, J. Colloid Interface Sci., 294 (2006) 151–154.
  24. M.A. Tantawy, Characterization and pozzolanic properties of calcined alum sludge, Mater. Res. Bull., 61 (2015) 415–421.
  25. W. Plazinski, W. Rudzinski, A. Plazinska, Theoretical models of sorption kinetics including a surface reaction mechanism: a review, Adv. Colloid Interface Sci., 152 (2009) 2–13.
  26. V. Vimonses, S.M. Lei, B. Jin, C.W.K. Chowd, C. Saint, Kinetic study and equilibrium isotherm analysis of Congo Red adsorption by clay materials, Chem. Eng. J., 148 (2009) 354–364.
  27. C.T. Hsieh, H.S. Teng, Influence of mesopore volume and adsorbate size on adsorption capacities of activated carbons in aqueous solutions, Carbon, 38 (2000) 863–869.
  28. M. Kosmulski, pH-dependent surface charging and points of zero charge III. Update, J. Colloid Interface Sci., 298 (2006) 730–741.
  29. E. Bulut, M. Ozacar, I.A. Sengil, Equilibrium and kinetic data and process design for adsorption of Congo Red onto bentonite, J. Hazard. Mater., 154 (2008) 613–622.
  30. Y.Z. Fu, T. Viraraghavan, Dye biosorption sites in Aspergillus niger, Bioresour. Technol., 82 (2002) 139–145.
  31. A.K. Golder, A.N. Samanta, S. Ray, Anionic reactive dye removal from aqueous solution using a new adsorbent – sludge generated in removal of heavy metal by electrocoagulation, Chem. Eng. J., 122 (2006) 107–115.
  32. V. Vimonses, B. Jin, C.W.K. Chow, Insight into removal kinetic and mechanisms of anionic dye by calcined clay materials and lime, J. Hazard. Mater., 177 (2010) 420–427.
  33. X.C. Wei, R.C. Viadero, Adsorption and precoat filtration studies of synthetic dye removal by acid mine drainage sludge, J. Environ. Eng.-ASCE 133 (2007) 633–640.
  34. C. Namasivayam, D. Arasi, Removal of congo red from wastewater by adsorption onto waste red mud, Chemosphere, 34 (1997) 401–417.
  35. A. Tor, Y. Cengeloglu, Removal of congo red from aqueous solution by adsorption onto acid activated red mud, J. Hazard. Mater., 138 (2006) 409–415.
  36. C. Namasivayam, R. Jeyakumar, R.T. Yamuna, Dye removal from waste-water by adsorption on waste Fe(III)/Cr(III) hydroxide, Waste Manage., 14 (1994) 643–648.
  37. M.F. Attallah, I.M. Ahmed, M.M. Hamed, Treatment of industrial wastewater containing Congo Red and Naphthol Green B using low-cost adsorbent, Environ. Sci. Pollut. Res., 20 (2013) 1106–1116.
  38. V.V.B. Rao, S.R.M. Rao, Adsorption studies on treatment of textile dyeing industrial effluent by flyash, Chem. Eng. J., 116 (2006) 77–84.
  39. I.D. Mall, V.C. Srivastava, N.K. Agarwal, I.M. Mishra, Removal of congo red from aqueous solution by bagasse fly ash and activated carbon: kinetic study and equilibrium isotherm analyses, Chemosphere, 61 (2005) 492–501.
  40. B. Acemioglu, Adsorption of Congo red from aqueous solution onto calcium-rich fly ash, J. Colloid Interface Sci., 274 (2004) 371–379.
  41. W. Shen, B. Liao, W.Y. Sun, S.J. Su, S.L. Ding, Adsorption of Congo red from aqueous solution onto pyrolusite reductive leaching residue, Desal. Water Treat., 52 (2014) 3564–3571.